WS-03A Adjustable LCD TV Stand Folding Metal Monitor Desk Stand With VESA Hole 75x75mm&100x100mm

As you can see from the photo, I had a limited amount of height and this was the lowest profile stand I could find and it works great. I had to return the one with the adjustable stand since the whole stand was 2” higher than the ceiling of my bookcase I did have to adjust the height and tilt out of its space since it is so stiff, but it’s not moving anywhere now. The height is perfect. Super easy to install, took less than 5 minutes. Very sturdy. Good value for the money. .

Really happy with this folding metal stand! I’m using it with my 16-inch portable monitor, and it works perfectly. The VESA mount (supports both 75x75mm ) lined up without any issues, and setup took just a few minutes.The stand itself feels super solid — all metal, no cheap plastic. Once the monitor’s on, it stays put. No wobble or slipping around, even when I move things on my desk. Great for working from different spots without dragging around a big setup.

First off, very sturdy and stable. I found fastening the monitor to the stand easy, only having to use four standoffs and then four screws. HOWEVER: The adjustment hinges must have been assembled by Arnold Schwarzenegger. Talk about stiff! Do not try to adjust AFTER mounting the monitor. Make your adjustments to the angles you want before mounting the monitor. I made a guess, mounted the monitor and then decided I wanted to change the vertical angle slightly back at the top. I eventually had to remove the monitor, strong arm the hinges to the correct angle and then remount the monitor. Other than that, I am happy with the purchase.

This was exactly what I needed for my computer monitor. To give you some background, I had purchased some desk organizers to help keep my desk tidy. One of them being a monitor riser with storage and shelves. Due to the fact that my desk is an armoire style, vertical space is at a premium on top of my desk.The monitor on its own stand was too tall, and the stand was not adjustable.....at all. I needed something short - VERY short - to replace the stand. I found this unit that looked like it would go from 90 deg to 0 deg. Which it does. Beautifully. I installed it, folded it to where I needed it, and it now fits perfectly between the riser and the armoire. The edge of the monitor is sitting at exactly 1/4 inch from the top of the riser.The stand came with screws that fit the VESA mounts on the back of the monitor.It is extremely adjustable.It is very easy to install.The monitor is as sturdy on this stand as it was on its own stand, if not more sturdy.The joints of the stand are quite stiff. I found it difficult to adjust with my hands even without anything attached to it. BUT....I would rather have them too stiff than not stiff enough. Once mounted, it was easier to adjust than I expected. At first I thought I would bend or break something on the monitor trying to get it in position but it was fine.I would definitely buy this product again and highly recommend if you're needing a replacement stand for TV or monitor.

Very sturdy, does not move once it's in a position. Easy to assemble and appreciate the multiple 75mm x 75mm holes - easy to find a set that fit my portable monitor which only has 2 VESA holes. Still kept secure. Wish the joints were slightly looser so it could function in multiple positions more easily. Moving from flat to upright takes a lot of force

This is an amazing stand for Elektron Syntakt, Digitone series with Vesa mounting holes in the back. The stand is sturdy, with very "stiff joints" so the attached devices don't shake/wobble, and stay perfectly in place when/after playing. It can be a bit of work to adjust, but you can set it and forget it once done, and don't need to constantly adjust angle/tilt (like most monitor arms out there).Photos attached shows ways this stand can be used for Syntakt and Digitone, and as noted above, the height and angle are super adjustable, but it stays in place while playing (see how the two units can be almost perfectly flush against one another in the side by side photo) with zero noticeable wobble.My only complaint is the stand is too "tall" some time. The bottom of the digitone/syntakt measures to be about 1.75'' from table surface when the stand is all the way down, but all the benefits noted above more than makes up for this.This might be a super niche comment - If you use Output Sidecar, Syntakt/Digitone fits perfectly in the drawer above the 19'' rack without the stand, but with the stand, too tall by about 0.25''. I've had to relocate the Syntakt/Digitone after getting the stand, but it is definitely worth it.To summarize - This stand is slightly pricier than some others on amazon, but it's totally worth it. I'd highly recommend buying this stand if you have any of those elektron gear with Vesa mounting holes (i think digitone, digitakt, syntakt, analog heat, analog heat+fx).