Syntech Link Cable 5m Compatible with Oculus/Meta Quest 3/Meta Quest 3S, Quest2/Pro/Pico 4/Ultra Accessories and PC/SteamVR, High Speed PC Data Transfer, USB 3.0 to USB C Cable for VR Headset

Picked up this 5m Syntech Link Cable for my Quest 2, and it's been a game-changer. The length gives me plenty of room to move without feeling tethered too tightly. Connection has been rock-solid—no dropouts or lag during sessions. The L-shaped USB-C connector is a thoughtful touch, keeping the cable out of the way while playing. Data transfer speeds are impressive, and it even charges the headset during use, which is a big plus. Overall, it's a reliable and affordable solution for anyone looking to dive into PC VR gaming

I purchased this cable after my oculus link one had broken, at first it didn't show up as a USB 3.0 connection but once plugged directly into mother board this issue was fixed.The display it out puts is amazing with no latency delay, never has wiggled out nor have i ran out of cable (5m) feels sturdy but i have seen thicker cables out there for this price range, also on original oculus charging port is vertical to you cant cable manage this, where as oculus two charging port is horizontal so this works just fine, either way doesn't bother me.One thing to note is this cable will not charge your oculus whilst playing although it will die much slower than normal, isn't the end of the world in my case but most display cables will be the same.overall impressed with quality and worth it when you need it, as airlink is great but currently doesnt beat connection through a cable in my opinion, Recommend

Super fast USB3.0 for high res PCVR, worked great for me using ALVR over USB in 6K to my Quest 2Quite thick (~6mm incl. rubber sheath) but this means it is very long and doesn't need extra power like some with a brick in the middle which I preferUse it for VR and keep it on my desk coiled for super fast file transfer (vr "videos") as it is USB-3.0It comes with a reusable SYNTECH cable tie and a free sticker if you want it, i put mine on the side of my head strapSideways USB-C on one end so you can use the cable tie to keep it attached to the back of your head without bending the cable, much better than using a straight one

I purchased this for meta quest 2 and 3 headset.On opening the package the quality of the cable/sheath and connector’s look and feel of good build quality , although I must admit when I purchased the meta quest 2 I purchased an official shorter data cable which I have since lost , but I seem to remember official cable was much thicker than this one, so not sure if this will effect the longevity of the cable.When I got the Meta Quest 2 I tried to use cable tethering to allow me to play PCVR/Steam games, but after several weeks of trying to get it to work properly I simply gave up.Since then after upgrading my home PC to something considerably above the minimum specification’s recommended by Meta I thought I would give it a whirl again, hence the purchase of this cable.As mentioned above the quality of the cable seemed good , unrolled from its original packaging it seemed likely to be well made enough not to kink or twist.Has a 90 degree connector which fits the quest nicely and connected to the PC via the front USB socket with no problems .. PC then detected the headset very quickly and setup in meta quest app and steam VR with no issues.I can’t see anything on the cable usb connector that shows it being a USB 3 connector/cable in fact the usb insert is black denoting this is a USB 2 cable.I checked the cable box supplied and it only mentions it’s suitable for a USB3 socket and not that it’s a USB 3 cableIn saying that the cable works absolutely fine with the headset and works well with Steam VR.But if you are going to purchase this cable you NEED to assume it’s a USB2 cable and not a 3 as advertised.When I get a few minutes I’ll do a speed test on the cable and add the results here .

Very good Quality cable. At least it feels so. Quite thick and very flexible. It's rubbery cover shell feels premium. What is most important, at last I got my Quest 3 headset to work on USB 3 instead of USB 2. I mean, I have Original Meta's (Type C to Type C) cable and very good fast USB 3.1 (Type C to Type A) cable, but for some reason my PC just refuses to see a USB 3 connection for Quest 3 Headset. Everything else working on them cables as supposed to. Trying this Syntech one - oh yes, Quest 3 is on USB 3.0 straight away. So I can recommend it very much to everyone with such problem.Here is only 2 things to consider. I got to try 3m cable, but if you are buying it for VR headset, I would recommend 5m instead of 3m. Even if you have a small playroom as me here. It is ok for me here, but for some cable management it won't be enough.And other thing which I'd say is more important... If You hope that Cable connect will give you an extra play time, this cable is not for You. PC USB Type A gives a very weak power output. Not sure how it is is working with other Headsets, but My Quest 3 discharges as usual and what is even surprising for me, it is not charging at all even when is switched off. It is showing that headset is charging, but after 4 hours of charging headset was on 72% power - the same number as it was when I was leaving it to charge 4 hours ago. So I have ordered another Syntech cable now. 5m long and with separate charging socket to get charge from it's original charger. Will see how it will go.Anything other than that is just perfect. Very good and fast link cable.

Excellent price, and it actually works very well in comparison to it's competitors

Works and is long but its obvious why its cheap with its audio cut outs and sometimes difficulty with the PC registering it.