100-Pack Cat6 Cat6A RJ45 Pass Through Connectors Ends, 1.2mm Shielded Connectors for 23AWG Solid Wire and Standard Cable

Good quality product. Unlike many others that Ive tried that claimed to support 6A, this product actually fits REAL Cat6 and 6A Soild (23awg) conductors. Shielding with cable jacket fits as well!

After purchasing a number of items, I finally settled on this product, along with "YIOVVOM Soft Plastic Ethernet RJ45 Cable Connector Boots Cover Network Strain Relief Boots CAT6A CAT7 CAT8 100PCS (White)" from Amazon and a spool of Monoprice Cat6A Cable 23AWG. These 3 items all fit together correctly and snugly to create solid Cat6A cables.

Great connectors for CAT 6A 23 AWG, the copper wires passes easily, but you need to force the connector a bit to get the plastic cover to get to all the way through. In giving it 4 stars because, for every 10 connectors, 1 of the was missing a gold pin, so was a bit annoying to finish all my 20 patchcords and find out that 2 of them were faulty. But overall a great product. 100% recommended

These are very difficult to work with. The wire guides inside the connector don’t always get the wires to the correct spot. So you have to pull it back out and fiddle with it over and over again. It takes 3-5 times as long to terminate these compared to others I’ve used in the past.

Must buy

It was on sale ( Good Price ) and very easy to use. The pass thru connectors for me was a must. Very happy with product, and delivery was very quick

Anyone who's crimped Ethernet cables knows it's a colossal pain of a task: you have to strip the wire, untwist everything, organize it into eight channels, then shove it all into the connector without any of the wires ending up out of place.On top of that, most connectors require you to cut all of the wires exactly the same length because the wires dead-end in the bottom of the connector. This is really frustrating because you need them to be super short to have enough insulation in the back of the connector for the crimp to be secure. which means you're now working with under a centimeter of cable, while trying to keep all eight wires in the right order. Arrrgggh!This product neatly solves that problem by letting you push the wires all the way through the connector. Brilliant. Now you can cut the wires extra long, maybe even feed them in one at a time, and then shove them all the way through at the last step to pull it tight.The manufacturer recommends a special pass-through crimper for doing the crimping, but you can also just use flush cutters to cut the ends off in conjunction with a traditional crimper. I strongly recommend Hakko CHP-170's for that purpose if you go that route - they're a great flush cutter to have on hand in general.The packaging for these connectors is reasonable, too - you get a nice little screw top jar instead of the usual plastic bag I typically see. Thoughtful!

Passthrough design make is easier to make tight fitting cables. Use good crimper with good end cutter to get best results.