3M Silicone Paste, 08946, 8 oz, Clear

This paste is fantastic and useful for just about anything. I have used it on brake hardware, conditioned automotive door gaskets, storm door lock mechanisms, and dielectric grease for battery terminals. Just be aware that if when you open the bottle it looks like "there should be more", you arent wrong. My mother just bought me some more as a gift and the new one is full to the brim. When I bought my first one i felt like it seemed a bit low but I wasnt sure so I didnt think anything of it. I must have gotten a low weight one from the factory or someone used it and returned it. Either way too late to do something about it now. Great stuff.

I purchased this 3M Clear Silicone Paste (#08946) to use on my brake guide pins and the back of my new brake pads I would be installing. The delivery of this product was quick and without problems. The plastic bottle's lid has a brush attached underneath that is used to apply the silicone paste to your particular job. It is a heavy paste, about the consistency of jelly you would use on bread (do not use this silicone paste on bread!). It worked well for my brake guide pins and pads. I have used it on my electric gate opener arm and the rubber bulb on my antifreeze tester....all with good results. It should come in handy for other lubrication needs around the home (door hinges, tools, electrical contacts, O-rings). It is a thick paste, so it has to be spread with the brush on your project, but it won't run off. If your "project" can't come apart, this is probably not what you need, as a silicone spray would be more appropriate. While this paste is not completely clear, it most closely resembles in appearance the clear silicone caulk you would use for sealing cracks around the home (but this doesn't harden like caulk does). For the purposes I have used it for so far, I have been pleased. The price for a bottle of silicone was the only thing about this product that made me think twice about purchasing it. Seemed a little expensive....but it should last a while!

I still use my last metal jar that I bought in the late 80's (I just used a screwdriver to get the last 10% off the sides and move it to where the brush can reach). This new bottle is just a replacement. I use it mainly for electrical situations where waterproofing is critical (Motocross spark plugs, golf cart plugs, ATV plugs) as it lubricates and makes the spark plug connectors waterproof. All of my backpack sprayers, hand held sprayers and anything with a rubber O'ring gets slathered. My swimming pool fittings, all O'rings, valves, and it's a must-have around the cars and trucks as it is truly awesome. Try it on any rubber seals and you'll see what I mean. Lot's of uses for a DIY'er and I find it indispensable. Get some and throw it in your tool box and 30 years later you'll be glad you did!Pro's: Too many to listCon's: 1.The brush is too short and you can't ever finish it off without using something longer to get to the goop. 2. Cost - it's expensive and always has been, but it does last forever

This is a long lasting, odorless, chemically inert, temperature stable, high quality lubricant made by 3M. The bottle features a brush that was designed by thoughtful people who intentionally bent it so the brush could reach the corners of the jar. If the brush were straight, it wouldn't be able to fish all of the grease out of the jar. All greases that I have ever purchased from 3M, permatex, and CRC include a bent brush. I would be concerned if the brush were not bent and take that as a queue that the product might not be authentic.I included four photos of the 3M silicone paste and and a photo of an old jar of 100% silicone grease from a scientific supplier. Side by side, they both look, smell, and feel exactly the same.One of the benefits of silicone grease compared to other grease products is that silicone grease does not off-gas smelly fumes the way other petroleum distillate greases typically do. For example, I often use Lucas X-Tra heavy duty grease, which is very smelly, to lubricate bushings and automotive connections. Lucas products smell but since it's used under the car, it's not big deal. If someone were lubricating something that people have close contact with, or something inside of the home, they should use an odorless grease.I personally use silicone grease on all braking components because I have had issues with inferior greases that vaporize and leave me with squeaky brakes.

I bought this to do a few brake jobs over the weekend and after reading several reviews i decided on this product over the synthetic ones based on the reviews. I was not disappointed to say the least. The silicone itself is fantastic. Its thick enough to comfort you into knowing it will stay on without too much of a mess while holding up to water and weather. I kept knocking over the bottle and none of it spilled once, which is great since its a paste and nothing should really be leaking out. Although it is a thick substance pushing the brakes between braces by hand was very easy. The reason i didn't give it 5 stars is because the cap has a brush attached to it which is what i expected. But since the paste is so thick (at least i don't think it was done on purpose) the brush came bent at the center. So the brush had some sore of V-shape to it. for the most part it was still easy to use except when it came to greasing the caliper piston and the rubber seal around it. It made it near impossible to do so without another set of hands. If this isn't done intentionally i would assume most come this way because the paste is so firm when i would purposely replace the brush into the bottle it can feel the brush giving way first and not the paste. a firmer stick to the brush would do the trick. This wasn't that big of a deal i struggled between 4 or 5 stars and i imagine most people won't mind this at all.Pros: cost, qualityCons: brush