do these fit 02 chevy suburban 5.3 they look too short

Your observation is the same as mine. I went so far as to call MSD customer service and ask why they couldn't make the wires "just an inch longer"? I even offered to pay a little more. I explained that there was too much of a strain on the wire coming out of the spark plug boot and individual coils because the wire appeared to be at a 90 degree angle to the boot. After hearing me out, their tech rep told me that the spark plug metal connector inside the grey spark plug boot was "relieved" in 3 or 4 places so that it could be bent. I asked their rep to explain. He said all I needed to do was take the spark plug end boot and bend it in the middle. He went on to say I could bend it up to a 45 degree angle. So I did as he instructed and it worked like a charm. Use a very small amount of dielectric silicone to lube the inside of the grey boots, and make certain the inside terminal 'clicks' onto the end of your plugs. With the bend, these plug wires fit perfectly without any excess play. I use a set on my 2002 5.3 Silverado and 2007 6.0 LS2 Corvette. I also pointed out to the MSD folks that there is nothing in the instructions referencing this bending of the spark plug boot. I also told them that because they had not bothered to explain this feature, customers are perceiving the wires to be too short. I even told them that companies like Summit Racing Equipment are not recommending MSD wire because they don't fit due to being too short. I suggested their sales guys go out and re-educate their clients and that an additional instruction sheet be put in every box of MSD wire explaining this bendable feature. They completely agreed with me, but it sounds like that has not happened yet due to your question concerning wire length. Hopefully this helps you. These are really very good wires, and will last for many years. Much longer than OEM wires.

Are these the right type lenght ,and fit for a chevrolet silverado 1500 ls with a 4.8l v8?

Hi Timothy, yes these will work on all LS series engines- 4.8, 5.3, 6.0. 6.2, and 7.0. The coils are mounted on the valve covers on all LS motors in the same location regardless of the displacement. However, there is one very important detail that you need to know. If you attempt to put these wires on the coil and plug as they come out of the box, you will get the feeling the wires are about an inch too short because there will be a very tight fit with the wire on the plug end being strained at almost a 90 degree angle. I talked with MSD's tech support guys, and they told me that on the plug end, the metal connector inside the plug boot has relief holes and can be bent to a 45 degree angle. Just take the grey spark plug boot, and bend it a little in the middle. I did this, and they fit perfectly without any strain on the wire. I asked why this fact wasn't printed on the box or in a supplemental direction sheet? They were actually at a loss to tell me, so I suggested that an illustrated instruction showing how to bend the spark plug boot be put in each set of LS wires. Hopefully, this has been done by now. You will be very pleased with the performance increase if your stock Delco wires have been on your engine for a while. As time goes on, the ohms of resistance build up to 6,000 to 10,000 ohms in each stock Delco wire. The MSD wires have 25 to 30 ohms because of the copper wire wound around a carbon core. There is no radio interference or RFI to affect the engine Electronic Control Module. These are great wires.

dose it fit in 2014 yukon denali 6.2 ?

You will need part number 32823 (black) or 32829 (red) for a 2014 Yukon.

Puedo usarlos para una chevy silverado 1500 2003

Si para el 5.3 yo trate de usarlos para el 6.0 y no quedaron

Desertcart Logo

Deliver to Bolivia

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

Description

⚡ Ignite your ride with unstoppable power and precision!

BUILT IN EMI SUPPRESSION - Ferromagnetic impregnated core and 40ft ladder wrapped wire block interference for flawless engine timing.
KEVLAR REINFORCED DURABILITY - DuPont Kevlar inner core boosts tensile strength, preventing wire damage under stress.
RUGGED HEAT ABRASION SHIELD - Proprietary outer shell resists extreme temperatures and wear, built to last in demanding conditions.
PRECISION STAINLESS STEEL TERMINALS - Dual wave tabs separate conductor and jacket for secure, corrosion-resistant connections.
ULTRA LOW RESISTANCE FOR MAXIMUM SPARK - Copper alloy conductor ensures less than 50 ohms per foot for peak ignition performance.

The MSD 32819 8.5mm Super Conductor Spark Plug Wire Set features a copper alloy conductor with ultra-low resistance, a Kevlar-reinforced core for enhanced durability, and a proprietary heat- and abrasion-resistant outer shell. Designed with built-in EMI suppression and stainless steel terminals, this wire set delivers reliable, high-performance ignition for select GM LS1 vehicles and more.

Common Questions

Are the products genuine and authentic?+

Yes, all products are sourced directly from authorized retailers in the US, UK, UAE and India. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

How long does delivery take and is it reliable?+

Delivery times vary by destination country, typically ranging from 3-9 business days. Each order is fully trackable through our system. We handle all customs clearance and use reliable courier partners for last-mile delivery. You'll receive regular updates about your order status via email and our app.

What is Desertcart? Is it safe to order from?+

Desertcart is an international e-commerce platform operating since 2014. We securely process thousands of orders globally each day. Every product goes through our quality verification process before delivery, and we provide end-to-end order tracking, 24/7 customer support, and a comprehensive returns policy to ensure a safe shopping experience.

How is product pricing calculated?+

Our prices include the product cost, international shipping, import duties, customs clearance, and local delivery charges. We handle all customs and import procedures, ensuring there are no hidden fees upon delivery. PRO members receive additional benefits including free shipping.

Bs.6525

Duties & taxes incl.

Boliviastore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

ChatGPT - opens in a new tab Perplexity - opens in a new tab Claude - opens in a new tab Grok - opens in a new tab Google AI - opens in a new tab

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Reema J.

Perfect platform for hard-to-find items. Delivery was prompt.

1 month ago

Anita G.

Good experience, but the tracking updates could be better.

2 months ago

View all Trustpilot reviews

Brand	MSD
Core Material	Copper
Thread Size	8.5mm
Top Material Type	Alloy Steel
Vehicle Service Type	Snowmobile, UTV, Van, Watercraft
Global Trade Identification Number	00085132328192
UPC	085132328192
OEM Part Number	32819
Product Dimensions	20.32 x 25.4 x 6.86 cm; 49.9 g
Item model number	32819
Manufacturer Part Number	3f36f1db-d6ce-47c7-ad66-8222e3e59958
Assembly Required	No
Country of Origin	USA
Item Weight	49.9 g

MSD 32819 8.5mm Super Conductor Spark Plug Wire Set

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions