KREG® Drawer Slide Jig

Q: Will these jigs work with a cabinet that needs slide a rear drawer slide hanger installed? Did not see this application in the video.

No, don't buy these they are glorified framing squaren speed square or rafter Square's . Simply clamp bottom of Rafter Square's to face of cabinet 1/4 inch higher than bottom of drawer measurement. Screw it in your done. You can buy a rafter Square for a few bucks at harborfreight.com. Surprise they even have pocket hole jigs. Common mistake is that the Kreg Jiggs ARE THE only options for pocket holes & other items when in fact there has been similar if not identical devices for years and years at far cheaper rate.

Q: How do you use this for the bottom drawer in a box?

Hello Wilber,Mounting Drawer-Slide Cabinet Members*Place a ¼" 6mm-thick, 1½" 38mm-wide spacer board that is as long as the drawer slide between the bottom of the cabinet and each drawer slide.*For overlay drawer fronts, follow the drawer-slide manufacturer's instructions for the slide setback distance from the face of the stile (for face-frame cabinets) or the front edge of the cabinet side (for frameless cabinets). For inset drawer fronts, add the thickness of the drawer front.* Using the vertical mounting slots in the drawer-slide cabinet members as guides, drill pilot holes and screw the cabinet members in place.INSTALLING A DRAWER AT THE BOTTOM OF A CABINETUnder-mount Drawer Slides*Follow the drawer-slide manufacturer's instructions for installing the drawer membersThank You,Josh

Q: Do these work well without the kreg clamps shown in the pictures and video?

I don't like using the Kreg clamps with these jigs. Too hard adjusting them just right and then getting them in the right place. It's way easier to use a one-handed "squeeze" type bar clamp like the Irwin: https://www.amazon.com/IRWINQUICK-GRIPOne-Handed-Mini-Clamp-Pack-1964745/dp/B001NP9S7M/ref=sr_1_7?ie=UTF8&qid=1504218775&sr=8-7&keywords=bar+clamps I actually use clamps I got at Harbor Freight for $4 each.

Q: Can this jig work for drawers with slides mounted 2.25” from bottom of drawer?

Yes it can, the mfg wasn't thinking in 2 dimensions. Just flip the jig 180 in the horizontal plane, that is turn it upside down, you may need another clamp to hold the drawer slide or you can hold by hand, the important thing is that the slide is 90 dg to the front which it will be weather the jig is above or below the slide!

4.5/5

ID del producto: 530465973

Transacción segura

Detalles

Colour
Blue
Material
Plastic
Brand
Kreg
Finish Type
Unfinished
Mounting Type
Under Mount

💪Lightweight materials

📏Accurate positioning

🔄Reversible design

Comprados juntos con frecuencia

Kreg KHI-Slide Drawer Slide Jig - Drawer Slide Jig Kit - Drawer Slide Tool - for Cabinets, Drawers, Desks & More - Easily Install Drawer Slides - Set of 2

KREG KHI-Pull Cabinet Hardware Jig - for Cabinet Door Handles - Drilling Guide for Cabinet Doors - Creates Straight, Even Holes - Durable Drill Guides

Descripción

🔧 Elevate Your DIY Game with Precision!

USER FRIENDLY - Crafted from strong yet lightweight materials for effortless handling.
MADE IN THE USA - Proudly manufactured in the USA, ensuring quality and reliability.
VERSATILE DESIGN - Easily reversible to mount slides on both cabinets and drawer boxes.
PRECISION ENGINEERING - Achieve flawless slide positioning with built-in indexing tabs.
EFFORTLESS INSTALLATION - Enjoy repeatable results without the hassle of measuring and marking.

The KREG® Drawer Slide Jig is an innovative tool designed for precise slide positioning, featuring built-in indexing tabs for repeatable results without the need for measuring. Its reversible design allows for easy mounting on both cabinets and drawer boxes, all while being crafted from strong, lightweight materials for effortless handling. Proudly made in the USA, this jig is a must-have for any DIY enthusiast looking to enhance their woodworking projects.

Presupuesto

Drawer Type	Under Mount
Manufacturer	Kreg
UPC	647096806644 647096807337 735090165024
Global Trade Identification Number	00647096806644, 00647096807337, 05024763174193
Country of Origin	USA
Item model number	KHI-SLIDE
Product Dimensions	40.64 x 14.61 x 10.16 cm; 521.63 g
ASIN	B01L2T0IDQ

¿Tienes una pregunta? Mira lo que otros preguntaron

Will these jigs work with a cabinet that needs slide a rear drawer slide hanger installed? Did not see this application in the video.

How do you use this for the bottom drawer in a box?

Do these work well without the kreg clamps shown in the pictures and video?

Can this jig work for drawers with slides mounted 2.25” from bottom of drawer?

Preguntas comunes

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

Alí H.

Envío rápido y embalaje excelente. La herramienta Leatherman parece de primera calidad y resistente.

Hace 1 día

Rajesh P.

El servicio al cliente fue excelente cuando tuve preguntas sobre el producto.

Hace 2 días

Ver todas las reseñas de confianza

Compre globalmente, ahorre con Desertcart

Valor por dinero

Precios competitivos en una amplia gama de productos.

Compre globalmente

Sirviendo a más de 300 millones de compradores en más de 200 países

Protección mejorada

Opciones de pago confiables que adoran los compradores de todo el mundo

Garantía del cliente

Opciones de pago confiables amadas por los compradores de todo el mundo.

Aplicación DesertCart

Compre sobre la marcha, en cualquier momento y en cualquier lugar.

Bs.1629

Derechos e impuestos incl.

Boliviaalmacenar

Devoluciones gratuitas

30 diaspara usuarios de membresía PRO

15 diassin membresía