Will this work for a balanced diopole to and unbalanced coax line ?

Alfred E. Parker's article is a good one, but his answer is misleading. In fact, the MFJ-915 CAN be used as a 1:1 current balun at the feed point of a resonant center-fed dipole, though it isn't mechanically optimal. With an SO-239 adapter on the output, it will work for temporary antennas, and I've used it that way, but the MFJ-918, with the same internal design, is better suited mechanically for a permanent antenna installation. Other companies make similar devices, including Balun Designs, whose prices are a little better than DX Engineering, while their quality is sometimes better than MFJ. This is what is going on here (trust no one on baluns, including me; they are notoriously tricky to design or specify for a particular application): A center-fed dipole, at resonance, will have a purely resistive impedance of 40 to 50 ohms, depending on details of construction and mounting height above ground. Since this is close to the impedance your radio and coax want, you need no impedance transformation, merely a balancing of current at the feedpoint, which is exactly the same thing as blocking the common mode current. A common mode RF choke IS a 1:1 current balun. It can be placed at other points in the feed line as well, leaving the coax shield past that point as part of the antenna system, which is sometimes desirable as a counterpoise for odd, unbalanced antennas. A dipole that is NOT center-fed or not at resonance will have different impedance, and may require an impedance transforming balun, like the common 4:1. If you think you need one of those, to feed an off-center fed dipole, or a Windom, or a ladder line, check out Balun Designs website. They explain which 4:1 design you want for each of those applications. A note about the impedance of a center-fed dipole: You may find that the SWR is minimum slightly off resonance, this is because the resonant impedance is not 50 ohms for your particular antenna in its particular environment. Off-resonance, the resistive component of impedance can rise to nearer 50 ohms, and offset the increasing reactive component, to give a minimum SWR. It doesn't really matter much, but minimum SWR is often NOT at resonance, where the impedance is purely resistive. I know, this can drive a person nuts, I keep re-reading this stuff every time I work with a new antenna or modify an old one! Be cautious of power rating. Under some circumstances, depending on antenna design and feedline length, a balun will end up dissipating a fair amount of power. Make sure you have the correct balun type for the job, and that it is rated for enough continuous power input not to burn up!

Is this a low pass filter?

No. It consists of ferrite rings surrounding 50 Ohm coax. It serves to add inductance reactance (increase impedance) to both the shield and center conductor between the antenna and the transmitter. The common use is to remove RF from the case or ground of the transmitter that causes RF burns while transmitting. it does not have any impact on the SWR or attenuation of signals. Often the transmission line is exposed to the strong fields from the radiator elements of the antenna and the shield of the coax tends to present RF on the shield. My antenna is very close to the rig and after installing the isolator, all burned lips have healed. if i can be any further help, you can call me 469-231-2784.Jerry WestW5YXR

Why are these so much more expensive on Amazon than they are everywhere else?

Vendors may have different pricing, as they may sell more or less of any device, but that is up to the vendors. Not sure if you can negotiate pricing.

When you hook up the mfj swr analyzer to the antenna do you keep the if Isolator in line also while your reading the swr readings?

Yes, it becomes part of the antenna system.

Desertcart Logo

Deliver to Bolivia

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

Description

📻 Tune In, Block Out the Noise!

PERFECT MATCH - 1:1 impedance ensures optimal performance with 50 Ohm systems.
EASY CONNECTIVITY - Compatible with coax cables featuring PL-259 connectors for hassle-free setup.
WIDE FREQUENCY RANGE - Designed for 1.8-30Mhz HF use, perfect for diverse applications.
ENHANCE YOUR EXPERIENCE - Reduce TVI and enjoy clearer communication without disruptions.
SAY GOODBYE TO INTERFERENCE - Eliminate stray RF from your amateur and CB radio antenna feedlines.

The MFJ RF Isolator Balun MFJ-915 Choke is engineered to eliminate stray RF interference from amateur and CB radio antenna feedlines, ensuring a clearer signal and reduced TVI. With a frequency range of 1.8-30Mhz and a 1:1 impedance for 50 Ohm systems, this balun is compatible with PL-259 coax cables, making it an essential tool for any serious radio enthusiast.

Common Questions

Are the products genuine and authentic?+

Yes, all products are sourced directly from authorized retailers in the US, UK, UAE and India. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

How long does delivery take and is it reliable?+

Delivery times vary by destination country, typically ranging from 3-9 business days. Each order is fully trackable through our system. We handle all customs clearance and use reliable courier partners for last-mile delivery. You'll receive regular updates about your order status via email and our app.

What is Desertcart? Is it safe to order from?+

Desertcart is an international e-commerce platform operating since 2014. We securely process thousands of orders globally each day. Every product goes through our quality verification process before delivery, and we provide end-to-end order tracking, 24/7 customer support, and a comprehensive returns policy to ensure a safe shopping experience.

How is product pricing calculated?+

Our prices include the product cost, international shipping, import duties, customs clearance, and local delivery charges. We handle all customs and import procedures, ensuring there are no hidden fees upon delivery. PRO members receive additional benefits including free shipping.

ChatGPT - opens in a new tab Perplexity - opens in a new tab Claude - opens in a new tab Grok - opens in a new tab Google AI - opens in a new tab

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Vikram D.

The MOLLE sheath is of exceptional quality. Very happy with my purchase.

2 weeks ago

View all Trustpilot reviews

Manufacturer	MFJ
Brand	MFJ
Item Weight	10.5 ounces
Package Dimensions	7.68 x 7.64 x 2.24 inches
Item model number	MFJ-915
Is Discontinued By Manufacturer	No
Manufacturer Part Number	MFJ-915

MFJ RF Isolator Balun MFJ-915 Choke For Ham & CB Radio HF Antennas

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions