Desertcart Logo

Q: could you use this to trace automotive wiring, say from a turn signal light to the blinker module? I guess the 2 major concerns are could you just attach 1 clip to one wire and be able to find that wire and 2nd will it still work even if there is something at the other end of the wire like an ecm.

Yes, but there are a couple of caveats. First, as others have said, it has to be a dead circuit. This toner is designed to be used on a circuit with no power. Otherwise you will kill the toner. Second, this unit is very powerful. What that means is that you can get a lot of signal “bleed”. For example, the more exposure your signal wires (wires A) have to other wires (wires B) the more time bleed you will have on ‘wires B’. If they cross paths you could pick up the tone on wires A you are testing on as well as wires B you are not testing on. If they have a lot of exposure, for example if the wires run side by side over a good distance (such as wires bundled together in an automotive wiring harness) you will get a VERY STRONG tone on wires B. So strong that you can’t tell the difference by tone alone. That’s what’s nice about the continuity feature. You can confirm by shorting the pair of wires you suspect and the tone will change confirming that’s the pair of wires you have your leads hooked up to. So, yes, but you need to confirm it.

Q: I've had three wall outlets go dead (not at the same time) within the past few months. Would this tool help me find the problem? If not, what can I do

If you mean a Power Receptacle then no you need a Power Receptacle Tester, its a 3 prong tester with 3 LEDs you plug it in and tells if you have a short etc. If your house or office is properly wired the junction box should be labeled correctly and should be able to reset the breaker. Other wise you have a bad breaker and need an electrician.What this tool is for is for tracing Phone and Network Cables back to a Panel when the jack and panel have not been labeled correctly. Basically it emits and audio tone across to wires and you would not want to connect to high voltage Power lines you would destroy the device. Their is a similar item for electrician at flukes web site I believe this what you want, http://en-us.fluke.com/products/electrical-testers/fluke-t5-1000-electrical-tester.html

Q: Electrical panel was stolen and the wires were cut. Could I use this to trace cut wires back to the pumps, lights, etc.?

So long as the wires are not powered - and you have access to the un-shielded wires at the other ends (outlets, lights, pumps) then it can be done. Two people and communication makes the job faster. Remember to trace mainly the Hot or Phase leads, since the Neutral and Ground will go many different places. Also, to get started, cross-connect all the Neutral leads at the panel location and use that for the 'Black' lead on the Toner. I've done this a few times. I hope this helps.

Q: Can i use this to trace a coax cable

I use these to trace bundled coax inside a cable headend (data center). Strip the coax to expose the stinger. Clip the red aligator clip to the exposed coax copper stinger. Clip the black alligator clip to a non painted metal surface. I use a screw that is sticking out of the rack or to the rack ground strip inside the rack. Also clipping it to the base of a ground lug that is bolted to the grounding strip works well. That will give you the most accurate and loudest signal when tracing a cable in a large bundle.

Deliver to Bolivia

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

Description

🎯 Trace with confidence, connect like a pro.

ERGONOMIC ACCESS - Angled nail clips provide effortless access to each wire pair on the spot.
CLEAR AUDIO DETECTION - Powerful probe loudspeaker cuts through drywall and wood for quick wire tracing.
ON THE GO CONVENIENCE - Durable nylon pouch clips to your belt—always ready for the next job.
UNMATCHED SIGNAL REACH - Tone signals travel up to 10 miles, conquering almost any cable type.
PRECISION WIRE IDENTIFICATION - SmartTone™ tech delivers 5 distinct tones for flawless pair matching.

The フルークネットワークス Pro3000 Analog Tone and Probe Kit is a professional-grade tool designed for precise toning and tracing of wires on inactive networks. Featuring SmartTone™ technology with five unique tones, it ensures accurate pair identification. Its loudspeaker delivers clear tones through drywall and wood, with a signal range up to 10 miles on nearly any cable. The kit includes angled nail clips for easy wire access and a nylon pouch for portable convenience, powered by 2 alkaline 9V batteries (not included).

Have a Question? See What Others Asked

could you use this to trace automotive wiring, say from a turn signal light to the blinker module? I guess the 2 major concerns are could you just attach 1 clip to one wire and be able to find that wire and 2nd will it still work even if there is something at the other end of the wire like an ecm.

I've had three wall outlets go dead (not at the same time) within the past few months. Would this tool help me find the problem? If not, what can I do

Electrical panel was stolen and the wires were cut. Could I use this to trace cut wires back to the pumps, lights, etc.?

Can i use this to trace a coax cable

Common Questions

Are the products genuine and authentic?+

Yes, all products are sourced directly from authorized retailers in the US, UK, UAE and India. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

How long does delivery take and is it reliable?+

Delivery times vary by destination country, typically ranging from 3-9 business days. Each order is fully trackable through our system. We handle all customs clearance and use reliable courier partners for last-mile delivery. You'll receive regular updates about your order status via email and our app.

What is Desertcart? Is it safe to order from?+

Desertcart is an international e-commerce platform operating since 2014. We securely process thousands of orders globally each day. Every product goes through our quality verification process before delivery, and we provide end-to-end order tracking, 24/7 customer support, and a comprehensive returns policy to ensure a safe shopping experience.

How is product pricing calculated?+

Our prices include the product cost, international shipping, import duties, customs clearance, and local delivery charges. We handle all customs and import procedures, ensuring there are no hidden fees upon delivery. PRO members receive additional benefits including free shipping.

ChatGPT - opens in a new tab Perplexity - opens in a new tab Claude - opens in a new tab Grok - opens in a new tab Google AI - opens in a new tab

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

Meera L.

Smooth transaction and product arrived in perfect condition.

3 weeks ago

View all Trustpilot reviews

Manufacturer	フルーク・ネットワークス
Part number	26000900
Item Weight	500 g
Product Dimensions	30.99 x 45.72 x 6.5 cm; 500 g
Batteries	2 9V batteries required.
Is Discontinued By Manufacturer	No
Color	Yellow/Navy Blue
Style	Dry
Power source type	Battery Powered
Voltage	9 Volts
Number Of Pieces	1
Measurement Accuracy	対象外
Included Components	Main unit
Batteries Included	No
Batteries Required?	Yes
Battery Cell Type	Alkaline
Item Dimensions LxWxH	31 x 45.7 x 6.5 cm

フルークネットワークス Pro3000 アナログ・トーンおよびプローブ・キット【正規品】26000900