Raijintek compatible Morpheus II Core Black Heatpipe VGA Kühler

Really brilliant performance from this heatsink. Using two Noctua Noctua NF-P14s. Now 8 months in and temps on X-Plane 11 (high settings @ 1080) Average 32c to 44c max. Star Wars Battlefront II, Max 56c at 1080. FPS are consistently high and have fans running off motherboard as opposed to the GPU. This bypasses issues with Windows 10 compatibility with ASUS Strix (for now).Would highly recommend for low temps and performance.

Did much homework on how to best cool my Nvidia GTX 1080Ti FE as there were options for other cards but fewer for the FE model. Then I found the Raijintek Morpheus II Core Black Heatpipe VGA Cooler. I researched how to take my card to pieces (it was quite daunting and a good learning experience lol but YouTube is your friend) and then add the cooler along with 2 x Nocturn silent fans (also great BTW). Before with stock chamber cooler fan at 100% my card would run DCS World in 4K at 75C. Noisy as hell. With the Morpheus II and two fans running at about 80% (noise level vastly reduced) the card would run at 55C in winter and slightly higher in Spring/Summer 65C but that is substantially less than stock and much less noise. Room temp 19-27C in UK climate. Overall, if you are prepared to do your homework, void your warranty on your graphics card and become an ace geek to lower card temps, then this is the option for you. Price-wise it is a little expensive but I guess if you have a powerful card then cost does not come into it really. Go get it and geek the hell outta your rig :)

Basically a great product. Would like to have seen 15mm fan mounting clips instead of the supplied 13mm. 13mms fans are rare items so I was forced to use 25mm fans which makes a very bulky assembly covering all the slots on my micro ATX board. Weight makes card sag too. End result though is a 20 degree Celsius drop in temperature on my 970 so does the job well overall.

I bought this for a graphics card I bought from ebay that didn't have the original cooler still. I couldn't find many 3rd party coolers that would fit the card and found no 2nd hand original coolers without buying a new card.The cooler itself is fairly big so make sure you've got space in your case. It's also quite heavy, but was sturdy and solid when installed.I followed a youtube video to fit this cooler but I didn't really need to. The instructions we good and the installation was hastle free. I bought a couple of quiet fans to use with the cooler which were fiddly but not too bad. Everything worked as expected and I now have a cool and quiet graphics card!Overall it's a good cooler and I would recommend it to others

I installed this heatsink on my vega 56 reference card. There are few tutorials online so everything went smoothly. One thing to note is that there is specific model of this heatsink dedicated for vega cards which has extra clearance room for small VRM heatsinks. Anyhow, morpheus II black editions did fit my card well, however I had to leave few VRMS to the mercy of my twin 120mm fans I attached to the heatsink. Overall temperature of my card stays around 50C (stock was 75C). This is with mild overclock. VRM temperature jump up to around 70 - 80C (still enough headroom for OC if you wish to do so). With reference cooler it was around 60C. This is to be expected since it lacks cooling of stock baseblate. Overall I am very happy with my purchace especially noice level. I installed two bequite fans and I can barely hear them on full load. Stock cooler noice level was like a vacuum cleaner on a table. Good product. In theory you can even reuse it in the future. There was plenty of left over tape and heatsinks.

This, this is a monster no doubt, and if you have the time and skills/patience to install it, you won't regret it. It keeps my GTX 1080 ti below 55º C under load, with 2 120mm fans mounted on it, of course. A bit fiddly to install and quite thick, but if you have space in your case for it, buy it.

Bought it because it said it fit RX480..Well... it didn't, heat pipes hit the RAM heat sinks.On the subject of the RAM heatsinks, the adhesive pads, are very temperamental and prone to not sticking

Pros: Quiet when paired with appropriate fans, powerful cooling when installed properly.Cons: terrible quality of screws to keep the cooler fastened, after reseating once the screws are completely stripped making it impossible to remove the cooler!Does not fit all cards perfectly due to the uneven hot plate contact, will require lapping to fix this issue.Bottom line, not satisfied and damaged my graphics card on install.

Probably something I did. Despite looking at all of the youtube videos I couldn't get the fans attached and ended up using masking tape to stick the fans.Also, the tape used for the fins do not stick well to the chips.In any case, this is a sufficient solution with cards like the NVidia P40, if you know what you're doing.

So far, it's done pretty well. I slapped some Noctua fans onto it with the provided clips and it's quiet and cools fairly well.It was a little difficult seating the heatsink. You need 4 arms to do it properly. I ended up getting some adhesive rubber to hold the backplate in place (and provided some room to prevent component damage).Overall, it's not too bad. I will note that the 1080 didn't fit well with the large heatsinks so take that what you will.

Suite à la perte d'un ventilateur sur ma CG et sur conseil j'ai décidé de prendre ce radiateur!En ventilateur je l'ai couplé avec 2 Noctua et un contrôle manuel du % de ventilation !Résultat la CG reste au frais et permet donc de tirer le meilleur rendement possible de la carte (GTX1080)

Ottimo prodotto, molto performante. Se dovessi guardare l'estetica e la sua sua semplicità di installazione su una Vega 64, darei 2/5. Ma delle temperature così, ad aria...non le avevo mai viste. Consigliatissimo 😆

1660sに着くことを願って購入しましたが、そのままでは付きませんでした。しかし穴位置的に加工すれば付けられそうだったので鉄プレートにドリルで穴あけ後ネジを切ったところ上手くハマりました。69℃→50℃まで落ちてくれたので加工してでもつけた甲斐はありました。試しに買ってつかなかった方、加工したらつくかもしれないので出来る方やっては良いかもですね。