ZhanmaiZhanmai 12 Pairs Vampire Teeth Costume 4 Size Fake Fangs with 2 Tooth Pellets for Cosplay Props Halloween Party Accessories Masquerade Dentures Makeup Dress up Favors

The reviews are all true. The only thing i have to add is, i had to grind down the back of the fangs so i could close my teeth. I used nail clippers to cut off the back, then a rotary tool with a grinding bit to flatten it.I received 3 pair of each size, 13,15,17,19mm and 2 capsules full of beads.Points from other reviewers that worked for me:- don’t wait till the last min to fit them- the beads don’t adhere them, only create a custom mould for your gums- you must use denture cream/paste to stick them on- a toothpick worked excellent to gather the softened beads- don’t put more beads in hot water than you need for one fang, 6-12- you can put the tooth in hot water if you need to adjust after it cools

I bought to make kitty cat fangs but I had lot left so I made a full set of fangs. I love them! They are fun and fit like a glove. Though the thermal beads struggle to hold sometimes so if they fall out I used superglue to fix them on. It’s a good substitute instead of the 50 dollars ones on here.

I really love the 13 they are perfect fit for my mouth I lost all my real teeth in a car wreck so i have acrylic dentures I paid alot of money for and the dentist ageed to giving me fangs but they are hardly noticeable so I tried a few options now and these so far are the only ones i managed to apply easily and actually stick to my teeth . As I mentioned im a fan of the 13 . The 14 would be ideal as well but they sit too far forward in my mouth the 17 are perfect if your looking for longer ones and smaller teeth due to the skinny appearance they have . I only wish they sold packs of one size I would definitely buy an all pack of 13 sense I dropped one and couldn't find it and pretty sure i swallowed one . If applied correctly they have lasted 3 days at a time so far . I actually use 3 to 4 beeds and heat them with a lighter than use a metal pen to place them on the fang inside and press them firmly to my teeth making and upward motion in spreading try bead between my teeth and the fang adjusting angle to my liking quickly B4 the beads harden then I use one bead at a time heating with my lighter and place underneath around edges and on top front and back spread smooth and even around where I want it to stick once it's cool don't try to adjust or pull the bead or fang or you will break the seal and the whole thing will come loose . Took me a few tries to get it right but when I did I couldn't hardly pull them off after 2 or 3 days they just fall off which makes me sad but I pull the bead off and clean them up real good and reapply also when you get jagged edges after you have them set use a hot washcloth try not to burn your mouth but heating the spot up and use your fingers to smooth it out . I will be ordering more sense the back is thin and break off too . Hope this helps

got these for Halloween and had to try a few times to get them to stay on (so i ended up wasting a few pair). most important thing to know is that you should do a trial run with a pair (or two) before u really want them for a costume etc. best tips: directions say to place a small amount of heated pellets into the fang tooth first then press in but, i found the best way is to mold it to YOUR OWN tooth FIRST, covering the entire tooth and even into the side crevices, and the back of yr tooth too. MAKE SURE YOUR OWN TOOTH IS VERY DRY ALSO before applying the melted adhesive. then, quickly, brush some spirit gum onto the adhesive (u can buy that separately on Amazon) which will make it stick much better, and quickly press in the fang and hold it there WITHOUT MOVING!... for a good 2 minutes. either way, you do have to work fairly quickly in all steps bc the adhesive hardens pretty fast. as for melting the pellets, best to (carefully) use almost BOILING water, but use very little into a shallow bowl, so its easy to retrieve the melted bits. oh, and they clump together in the water too, so it takes some practice. use a tiny spoon or even some old tweezers to get them out. i dont recommend microwaving them, they get too sticky and gooey. sounds like a lot and well, it kind of is, but u should get the fang of it, i mean hang of it. you dont want them falling out, etc. oh and lastly eating and drinking w them in? just DONT.

Bad glue

The fangs are quality and if you use 15 pellets per fang you can make a great mold that fits in between your teeth and gums. I placed the pellets into a mug. Poured about a quarter cup of boiling water of the pellets. Then I used a small metal spoon to form a ball/glob while they were in the mug. Then lifted the glob up and using the tiny spoon placed it into the fang. I quickly put the fang over my tooth. Started pressing the waxy substance over and behind my neighboring teeth by the fang. Let the fang sit and harden a good ten minutes then you can pop it off your tooth gently. I did ONE fang at a time. I made two sets for my vampire costume. They are able to be pre-made/molded then I placed each pair into a zip lock bag and they fit snug like a dentist would make a temporary false tooth. Very satisfied with this purchase. I think they look real and are reasonably priced. I have to admit I am having a lot of fun with them and I have not even dressed in my costume yet! lol

The teeth themselves are good quality, very durable, they wont break, The color is quite white , like sorta unnaturally so they stick out a bit, Nice variety of sizes, however they do not stick whatsoever which is why ive rated 2 stars because they are basically unusable, If you can find some alternative adhesive then maybe they're worth y.our money, But otherwise not really worth what they cost, especially when they come with "adhesive"