Remflex 7009 Exhaust Gasket for Toyota L6 Engine

had no idea this gasket would cure my exhaust leak that I had from day one. This single gasket works for F and 2F engines. After reading the description I thought there were two gaskets for the manifold tot he head. There is only one. My original gasket had individual ports for the intake and this did not. After looking at the intake manifold on the F and 2F, they were the same. Bolted up, torqued to 20ftlbs and no problem. I highly recommend this gasket!

The gasket seems to seal up the exhaust and intake well. Hope it lasts

These are fragile gaskets and not easily shipped. My first set were broken beyond belief and missing gaskets for the heat riser. The second set came damaged as well, but I was able to make them work. They are super thick as far as gaskets go, and don't require gasket sealing material. If you are careful on installation they will last you a very long time, don't bend them or the material will fall apart. Put on correctly though, they will seal even with the mating surfaces being not planed or perfect, gaps are easily overcome. Just do not over tighten, there is a specific torque that these must be tightened to! After running these for awhile be sure to recheck a few times as these will shrink slightly and you will need to re-torque to maintain a good seal.-Uprayedd

I have heard a lot of good things about Remflex gaskets. I decided to give it a try on my 69 Land Cruiser, even though it cost more then other gaskets that I had been looking at. There is a lot of material on the gasket and it cleaned up my exhaust and intake manifold leaks that I was experiencing. My truck now runs better and is a lot quieter then before. I would say that there is no other option for getting a manifold gasket then Remflex. Did not disappoint.

Good quality but the package came slightly open and the longer gasket was broken.

Excellent gasket for the intake/exhaust manifold on an FJ40. Follow the instructions and you shouldn't have leaks. If you still have leaks then you should get a shop to mill the manifolds for you so they are flat.

Perfect sealed my leaks, and I feel it was worth the money. Shipping was excellent.

Although arrived with slight crease in packaging that had indicated that the packaging was insufficient to prevent bending. Gasket was still usable. Suggest buying locally if stronger packaging is not developed.