Lifetime 482731 Evaporator Fan Motor Kit by Seentech - Compatible with Whirlpool Kenmore Refrigerators, Freezers – Replaces: 4389140 8537621 4318001 0056721 0056801 1100473 PS376645 AP3110929 R0950025

We bought 2 others, one was damaged the other not like the photo at all but Amazon was great about returns. This kit worked great although we had to modify the fan a bit. There is one connector on each side (not both sides like in photo) of the motor but we pulled the tape and moved one over to the right. Works great and quiet!

I compared my fan motor to the one in the pic. They matched so I ordered it. The one I got did not have the electric terminals down one side like the pic, but 2 on one side and 1 on the other. This made one wire in my existing harness too short to reach the terminal. I used one male and one female spade connector and about 5 inches of wire to make a jumper and now it works. Boxed was crushed on arrival, motor mount arms bent. Straightened it all out and made it work.

I was going to be heartbroken if I had to let my old fridge go and it lives on because of this part! I didn't install the motor but the fan was an easy replacement and for the price I have a backup motor. Thumbs up!

One user wrote "The photo clearly shows both negative & positive posts mounted on the same side. What I received had the posts opposite each other, so the wiring in my freezer could not reach one of the posts. Unlike one buyer who was able to make his own jumper wire to accommodate this".Same on mine .. I had to make jump wire to make this work...Quality... Probably made in china....My Refrigerator worked fine for 30 years without major problem.Hope this one works for next 10 years.... LOL...

Great quality

It fit my refrigerator perfectly just be sure to put fan blades in the exact place as the old motor shaft.

It wasn't quite the same. I had to modify the pig tail on my refrigerator to make it work. Wires just bearly reached because the connections were on the opposite side. But it is working good.

Did not fit my whirlpool fridge. Looks very similar but DONT buy unless you are very good at taking things apart. Specifically had to cut the fan blades as the old fan would not fit shaft and fan included was too big. Side support arms were not adjustable and had to take old arms off from bad fan and swap out arms from new fan. When I did this fan did not spin freely anymore and it worked with some tweaking BUT probable not for long. Ground fitting on motor had to be cut off and rewired as it was different size. GOOD LUCK