Xtrons 170° Wide Angle HD Rear View Reversing Camera Waterproof with CMOS Imaging Sensor, 720P AHD Camera and Four-eye Strong LED Light (CAM009S)

Very good quality, clear picture

After the setting adjustment the camera is just great quality! The mounting screws could be better as they're easy to damage

The media could not be loaded. Installed this on my Xtrons heads unit in my 2002 Honda Civic.It works great, it has a clear image and it works exactly how it's supposed to (In the video I I haven't adjusted the parking lines yet).The caveat is the installation. It took me about 7 hours to install. It's not necessarily a difficult job it just takes time. You have to run a cable from the boot all the way to the unit.The cameras instructions are pretty useful with a diagram explaining how to wire it up. I used Tap Splice connectors to tap into the reverse light to supply 12v to the camera but you could solder it- if you can be bothered to.With some cars you may also need to add a 4 pin relay or a 12V relay regulator to provide a stable 12V to the camera otherwise the video feed will be flickering, buy hey, I didn't need one on my car and it's almost 20 years old!

This item is not working properly. Now in its fully fitted state the camera image flickers lots at stand still. Only shows a black and white image and doesn’t update when in movement until the screen flicks. Because this is not an easy to remove product as it’s quite timely. I will not be able to return it as new as I have had to use parts to fit it properly in the first place.

This was fitted to a Fiat 500.1. Get the wiring done first. That's the hard part.2. Fit the camera near the reversing light. On my car the reverse light is down low in the bumper. If you put the camera on the boot you won't get the cable through the boot trunking to the car body. Down at the bumper it's easier to feed the cabling into the car.3. You have two cables. Power - which will tap off the reverse cable. The signal cable - which will go to the head unit.4. On the Xtrons head unit you connect to a camera input, DON'T connect the pig leads on the signal cable, enter the head unit's hidden menu, tell the head unit what type of camera it is. The code is 8878.5. So you put the car into reverse, that powers the camera and LEDs. The head unit knows the car is in reverse, probably through the CANBUS, looks for a video signal, switches to it. If you don't tell the head unit the correct camera type, you will see static, or a black and white garbled image.Also in the "hidden menu" you can change the reverse lines.

I had this professionally installed with an xtron touch screen ntg4 for Mercedes both work excellent upgrade for my car

It’s okay but nothing special

Small compact but very good resolution. Works perfectly.with my entertainment unit and was fitted to automatically mute all sound when set to reverse gear.Only small issue is more.mine that camera as due to the set up at the back of my Jeep I had to offset it under the light so the lines don't align with my car. But that just took a bit of practice to correlate it mentally