Osmo750 Ml Polyx Hardwax Oil Matt 3062

Second time I’ve bought this. Very, very easy to all apply and goes on like water with either a cloth, brush or foam sponge. Nicely absorbed by the wood, leaving a natural looking clear finish. No drips. Pleasant smell. The coverage is good. A small amount, goes a long way, so great value.

I've used this before as a floor finish (for which is it a very good product). This time, I used to finish some bookcases that I made in oak. Easy to apply. I rubbed on and buffed with lint-free cloth (take care to dispose of used cloths safely by wetting them and bagging up for disposal). Drying time is quick - touch dry very quickly - even in November - and fully dry well within advertised 8 hrs. Odour is quite low and dissipates quickly. Excellent finish even after 1 coat but I used 2 coats for a deeper finish. Not cheap but I would certainly recommend for furniture finishing jobs.

Used for bedroom floor safe going forward and great finish

Easy to apply. Nice finish. Quality finish.

After reading a few reviews I decided to give this stuff a try. I’ve never treated doors before and from what people were saying it was easy to use etc. I ordered the 750ml tin and hoped it would be enough.I can agree that this stuff is extremely easy to use and goes miles!! I’ve treated four internal, oak veneered doors with one coat and I still have half the tin left. The doors are completely protected and look fab! I brushed it on with doors hung in place and was a breeze. Just need a microfibre cloth to wipe off excess which was a £1 in Tesco.I cannot recommend this product enough, amazing!

I have used Osmo Polyx for wood flooring for several years and it is fantastic stuff. It gives the wood a beautiful colour, is easy to apply and hard wearing.We use our conservatory a lot throughout the year and it has heavy traffic in a couple of places, frequently with wet shoes & dogs. In these conditions, the Polyx only needs to be applied twice a year to provide effective protection.Only thing to watch out for with the matt is that, while it dries much more quickly than the satin finish (3-4 hours in our conservatory, compared with 8-10), and looks matt, it stays slippery for ages!

I bought Osmo oil to use on oak veneer doors as recommended by the manufacturer (LPD). A word of caution, check with your door manufacturer which oils or varnishes they recommend as apparently they use different glues which can react with certain products. I had to change to Osmo after intending to use a brand I've used before as it was known to cause issues with the veneer. Having said that it went on really well, applied lightly with a lint free cloth, and after a quick rub down with a clean cloth left a very nice finish. I used two coats of matt to start with which left a dull finish so I added a third coat of satin which gave a very soft shine which was just what I was after.One 750ml tin was enough for two coats on seven doors so this stuff goes a long way.

Extremely impressed, sinks in very well, no overpowering stink and a little goes a long way. Nice and thin so easy to use but covers very well. Also the finish is beautiful and it's water proof enough for me in the garage on shelves I store buckets, washes and pressure hoses on. (That was 2 coats with 12 hour dry after first coat)