Coffee Distributor/Leveler Tool 58mm Coffee Tamper,Stainless Steel 58mm Anti-Slip Handle Macaron appearance, Adjustable Grip Handle, Black, Powder Press, Barista Family office leisure

Great tool

It's not as adjustable as it should be. Picture 1 shows the maximum I was able to screw the cap off without it falling off. About a half turn onto the threads which gave it 1/16" of total adjustment from fully seated to maximum extension. Picture 2 shows it at max extension. Picture 3 shows how much thread is sticking out at max extension. Picture 4 shows it fully seated. Picture 5 is the base and it shows a little metal thread that was still attached to the base. Picture 6 show that fully seated the threads only stick out about 3/16" and about 1/4" to the top. Picture 7 shows the cap is very close to 1/2" deep so the threaded section of the base could have been almost 1/4" longer. I'm hoping I just got a defective one and they normally have a longer threaded section. Picture 8 shows how coffee gets jammed into the gap between base and center section. If it allowed me to extend it as much as I wanted that may not happen as much. It would also be beneficial to make it a little more than 58mm because there is a decent size gap between the portafilter and the leveler where coffee doesn't get leveled and sticks to the sides.