Daycount Pack of 2 Invisible Cabinet Drawer Handle Rotating Zinc Alloy Hidden Grip Pulls Handles Hardware for Cabinet, Door, Wardrobe, Tatami and Drawer (Nickel)

Sleek and elegant. Hide away and uses less space within my storage area

The items were of good quality. One thing I want to mention......I am using the pulls installed overhead(Attic Access hatch). I found that with a slight nudge the handles would rotate. To assist in their staying hidden I ordered some weights that I glued to the inside of the handle to ensure that the handle remained flat with the surface.

I bought a two pack. One of the handles rotates smoothly and automatically stows when you let go of the handle, like it is designed to. The other binds a little.Kind of a pain to install. You have to do a lot of router work to inlay it and on the underside to make it the correct depth so the screws hold the top to the bottom with enough tension. I put a few washers between the screw and the bottom plate to get the right amount of holding power/tension to keep the top plate from moving

I used the flat inside plate as a template. Mark the rectangle and screw holes. Cut out a 1/16 more around the rectangle and drill the screw holes with a 1/4 in bit.

It’s cool. My kids love it. It’s pretty easy to install. I used it for a window bench seat so this handle fit my needs completely. I was able to make it fit completely flush with the seat which was great. Buy it.

1) there's no template for the hole you have to cut and since there's VERY little wiggle room on the sides before your hole will show that's crazy.2) Once I got the hole right I went to screw the pieces together - first one tightened down just fine. Second side there was almost an 1/8" gap when it stopped going in. I switched the screws to see if it was the screw - it wasn't it was the female part. Tried the second handle and same problem. Trying to buy the next shorter screw that I bought at the hardware store - it's too short. Had to go to a tap-and-die set which is ridiculous amount of work for this.3) Opened the next package and it has imperfections on the faceplate. Very frustrating.Since I've made the hole I'm now stuck and need to figure out how to make it work.

I love these drawer pulls. We needed something low profile due to how our kitchen is set up, and these are perfect. A little tricky for a DIYer to install, and we had to cut the ones for the false drawers under the sink, but all in all these are perfect for our needs.

Works as described but not the best quality