SCITOO Driver Side Mirror Glass for 2003-2007 For Cadillac Escalade, For Chevy Avalanche, Silverado Suburban Tahoe, For GMC Sierra Yukon Left Heat Mirror Glass Exterior Convex Turn Signal GM1324102

Pleasantly surprised by it. Mine delaminated and wasn’t usable anymore. This one fit and looks great, blinker is identical to my oem one. Not a reason to ever pay for oem with these so cheap. Was easy to plug in and snap into place.

Perfect replacement and simple to install.

2005 GMC Sierra 2500HD - So, this mirror is good. Not great, but good. Yes, the turn signal lights are orange, NOT red like the OEM mirror (fix for that is below). I am not sure yet if there is distortion in the glass. I will need to use it a bit more. The glass is not super high quality, but it seems usable. The removal of the old mirror was kind of a pain, but there are numerous videos on this on the Tube of the You. The wiring connector was the biggest pain to get undone. An automotive pick comes in handy here. As far as the orange turn signal lights go, you can swap out the LEDs that are in your old OEM mirror. Each mirror’s LED unit is housed in a small triangular “box” on the backside of the mirror. It is held closed by some tabs. The OEM mirror’s LEDs have removable wiring (small connector), while the replacement mirror’s LEDs are soldered on. Leave the OEM mirror’s small connector in place. You will need to cut the wires on each mirror’s LEDs, leaving enough wire on the new LEDs so the housing can be stripped easily. Once the OEM LEDs are removed from the old mirror, and the new mirror’s LEDs are removed, simply swap the OEM LEDs to the new mirror (green wire to black, yellow wire to red). I used some heat activated shrink tubing (with solder built in) to pair the wires. Note: The OEM LEDs have deflectors built in, but the new mirror has a separate deflector piece. This piece must be removed from the small triangular “box” on the backside of the new mirror. It comes out easily though. The old LEDs will fit in the triangular space, but they will not be snug. A bit of hot glue on the green/yellow wire will adhere it to the mirror backing. Be sure not to get any glue in between the mirror and the LEDs. I found that pushing the LEDs as far back as they could go (towards the center of the mirror), then adhering them worked best to get them centered in the correct position. Once the swap is made, test the wiring connections FIRST before attaching the mirror to the truck. If all is well, you should be good to go. I hope this is helpful to anyone who was annoyed by the orange lights! Now I have a new mirror with proper red turn signal lights! I am hopeful that there is not the “funhouse mirror” issue, but we will see. So far, I am not seeing much distortion. I was sure to get the glass completely attached to the mirror itself, and make sure it all “clicked” in.

We had a hailstorm that cracked my side mirrors, shattering the driver's side one. I thought this would work, but since my mirrors were aftermarket, it didn't work without pretty extensive modifications with a rotary tool. It works fine, but has large gaps around the edge of the mirror. If you have stock mirrors, this should work fine!

PERFECT FIT for a 2004 GMC Sierra 2500 HD SLT. Works and looks great

Bought this for my '04 Chevy Tahoe. The drivers side mirror went foggy and needed to be replaced. The mechanic wanted over $200 for part and install. I found this replacement here in Amazon and was excited since it was so much cheaper. There's a reason for that. The mirror fit perfectly, was easy to install and the in-mirror blinker works great. The problem is the mirror itself is "watery". It's kind of like looking in a carnival mirror. Images are wavy and hard to focus on. Having said that, it is still better than being charged $200+ for replacement.

Great replacement part. Everything works great

Good

جيده

Does not include the auto dimming my truck has but looks OE, signal lights match OE as does function, look and fitment. Lube the ring inside the mirror housing and on the mirror itself to avoid cracking the lens when clipping in Pros - good value - perfect fitment - functions as OE aside from the auto dimming - similar rearview curve to OE cons - no auto dimming - Needs a bit of fiddling and crimping for the heated elements to hold onto the mirror because the tabs are smaller than the OE

Perfect fit , good quality, shipped fast and good price.

Works good

Took 10 mins for me to take the old mirror out and pop this one back in. It’s like a glove and came in quick.