SE Limited 13A White Polycarbonate Socket Converter 1 Gang to 2 Gang

I fitted a few very similar ones, around the house, about 10 years ago. (Not sure if the same brand) They were always a but 'clunky' with plugs often very hard to plug in and switches poor quality. Eventually, most of them failed with plugs impossible to insert, switches completely failed in off mode, screw hole covers always falling out and eventually they blow up (tripping the breaker) when trying to get plugs in. (Seems the internal plastic parts are brittle and start to break and then the metal parts are free to move around and short itself out) One by one, I had to reinstall the original single sockets. So I bought one of these to see it they have improved. It does seem a bit more refined. Plugs can be inserted easily into both sockets, the screw hole covers have been improved and the switches seem a little better although still feel cheap. So will see how it goes but hopefully will buy more at a later date.

Very well made. Very easy installation. Simple instructions included. The only trouble you might have is the length of cables "to play with" after removing the single socket. (TURN THE POWER OFF FIRST !)Small flat-blade screwdriver needed.

Low price, basic design, fits well, easy to install and safe. Does exactly what I needed it to do... convert 1 socket into two without protruding into the room too much

Easy to fit & looks ok

Does what's it's designed to do, a bit fiddly getting the retaining screws in but they're all like that.

I bought and fitted two of these. Doesn’t stick out too much further than the original sockets I had. Very easy to connect up the only fiddly bit is getting the screws through to the back and lined up properly.

Spot on.

A little awkward to do the rear connectors due to the design, cable securing screws are not in the best location. Otherwise it does the job for a simple 1 to 2 socket conversion.