Soda can lids

Game changer- ever want to take an open 12 oz pop can with you to go or in the car but worried about risk of spills or contaminants getting into your soda ( like bees in the summer)? . Here’s a handy solution to all those worries and what I would expect would keep in carbonations and keep out fridge odors for this if you are one that just never drinks a whole 12 oz at one sitting. Mine actually were applied for the first time today and the score is me : 1 and spills : 0 even with the help of the cat. I’m super thrilled with these. Easy in and off and drinks like a 20 oz bottle. Love the resealable lid. I would wash or wipe off the can too ( that’s just me) since the liquid is in contact with the full top of the can while drinking. Multipack means sharing with my adult daughter and two older ‘mother/mother-in-law folks as they are always putting 1/2 finished pop into the fridge only to pour it out the next day since it lost carb/tastes like fridge. Or they buy the more expensive “ mini cans”. I think this will fit their needs perfectly. This top could function for a toddler allowing a careful sip out of a flavored water without it going everywhere. My first use was flavored seltzer and top fit that alt beverage type ( non cola) perfectly. I’d think these would be good when doing mixers where multiple open cans for use with mixing. Color coded so no more deciding what’s yours and praying you’re not sharing with the person with sniffles. This was a BuzzFeed shopping recommendation on some compiled list or another and absolute “ WIN” in my book. The fact that you get (6) in the package made the per item cost a bit more affordable. Not sure about “ dishwasher friendly status” - I’m afraid they’d melt like the budget “solo” cups I tried sending through. But that’s another review…….

I was skeptical. This was actually the last design I expected to work. It looks like it would just pop off. Not at all. These caps are great. I can't claim they prevent soda from going flat though. I bought the tops to use on the Liquid Death Iced Tea tall boys. But the seal is leak proof so I imagine it would keep a soda fresh for at least an extra 24 hours. The only complaint is that one of the covers did not fit. I tried it on multiple cans. Also, make sure the rim of the can isn't damaged and use as little pressure as possible. I bent the can on my first attempt because I pressed too hard. This was not the products fault. I didn't realize how flimsy some aluminum cans are these days. Apply firm pressure, be patient and the rim will slowly slip into place.

I had some older ones, different brand (still have a couple left, but a couple finally cracked so I bought this set). This brand doesn't give a hard click when the cap is in place like my others do/did, so although I have NOT had any problem (like leaks or the caps popping off), I'm a bit nervous. I would have preferred a hard click. But again, they work. I love having them on the cans so that nothing spills, the carbonation lasts, and no bugs or dirt get in there (e.g. at the beach, in the car).

I would recommend you clean or wipe off the top of the can before you push on the cover or you will be drinking whatever might be on top of can. Yuk They do not "click" on can and hold as tightly as my old set purchased years ago but they work just fine. They slip on and off without issue. They seal tightly and do not leak. I would expect them to pop off if your can fell off the table to the floor but held up well when I simply knocked can over. Did not leak and it took 12 times before top finally popped off when I tested mine. It will work just fine for drinking a cold pop around the house or in the outdoors but do not expect them to stay sealed if you are rough with the can. Also, once you open a can of pop the clock is ticking on how long it will stay fizzy no matter what you do. I have washed them in dishwasher on top shelf without issue. I see main advantage using these covers is keeping bugs out and reducing accidental spills if can is knocked over. Only marginally helps retain fizz.

Review of Clear Soda Can Lids (6 Pack) | Superior Can Covers For Soda, Beer, Energy Drinks, Juice, Seltzer | Must-Have Picnic Accessories & Beach Gadgets | BPA-Free Reusable Fizz Lids | By Smart House Inc I ordered these mainly because I was hoping to find something to help retain the fizz in an opened can of soda. These are not it. These might have helped retain some of the fizz, but little more than if I had just left the opened can sit in the refrigerator overnight. These are more of a convenience to help keep bugs out of your opened soda cans. They turn the can into drinking out of a bottle and do have a screw-on lid. I did not have any difficulties with placing the lids or removing the lids from the cans. They do seem to go on tightly enough to help prevent leaks. But if you knock a can over, I am not sure the lid would stay on depending upon the force of the fall and how far it fell. These are terrible for storing in a cabinet. They do not stack well at all and stack no more than 3 atop one another maximum. Even then they have a tendency to topple at times. I will keep them in the event of using them outside in the warm weather, otherwise, I will look elsewhere for a product to help retain the fizz. Hopefully this helps someone decide on this product.

The first time I tried to put it on an aluminum can of seltzer I dented the can horribly. By the 3rd try it was easy to do - fast easy and no dents. I’ve had no leaks around the seal where it meets the can or at the screw cap. That said, since most of my can beverages are carbonated, beware that if the can is jostled while the cap is screwed on tight (I.e., the can falls on its side), the pressure from the carbonation while cause this to pop right off. The fit is perfect, the value is just okay. I really like using them a lot because I just don’t like to drink from a can.

1 star might be a bit harsh but i bought these to preserve half empty sodas. I had these types of lids 20 years ago and they sealed great, these are cheap, bad seal on the can, bad seal on the cap too. Very cheap and they fall right off with barely any effort. Capped a soda, went to drink it 12 hours later and it was flat because it does not seal

I have been delightfully surprised, they WORK!!!! Wonder of all wonders, the ginger ale was not flat 24 hours later (usually it is as flat as all get out by then). Yes, I was not convinced when I purchased them that they would work, but, they WORK!!!! I have wasted more carbonated sodas and waters than you can shake a stick at since there was no way to close the can up after it was opened, finishing the can off was out of question, cause drinking another drop would cause you to float off. Gave two of them to my neighbor, she is in awe of them as well. They do not leak, little hard the first time to install on the top of the can, 2nd and 3rd time have been a charm, they fit like a glove. Just makes me giggle and heady to realize that now I do not have to toss all of that soda and fizzy water down the drain any longer. Buy them, you will not be disappointed, they will keep of all things ginger ale fizzy for over 24 hours (ginger ale goes flat faster than any soda known to mankind/womankind).