InkbirdITC-306A WiFi Temperature Controller, Wi-Fi Aquarium Thermostat Heater Controller 120V~1200W Temperature Control with Two Probes only for Heater Aquarium Breeding Reptiles Hatching.

I’ve had issues with fish tank heaters failing - or worse - getting stuck on. Like many others, this has almost resulted in fish death. Luckily, I’ve caught it the few times it’s happened to me before fish were lost.After the last time this happened a few months ago, I decided to add an upstream heater control, and found this one quickly as it had fantastic reviews.I like the redundant heat probes with failsafe operation, the 0.1° incremental control, and the Wi-Fi control is really what sold me. It includes a detailed history log so you can go back and see what’s going on with your fish tank over days and weeks.The temperature logging seemed like a neat feature, however, it was really a big hit with me once I got it. It immediately proved its value. I recently installed a new air conditioner in my room, which has allowed me to keep the room at a constant cooler temperature year-round. Previously, I had issues with ick, which I traced back to wildly fluctuating FishTank temperatures due to wild fluctuations in room temperature. So I would keep the fish tank around 80° so it would maintain that temperature when my room would get hotter on hot days. Now, my room stays closer to 74° year round. I was able to balance this new comfortable room temperature with a very comfortable Fishtank temperature, with minimal use of the heaters. I was able to set the unit’s high and low triggerpoints very precisely using the log to avoid inefficient heater use. I settled on 74.5 on the low end and 75.0 on the high-end. The heaters only crank on if I decide to make my room really cold for a while. I know I could never get this type of precision with the old style heater control, and having the temperature log charts is what allowed it to be so easy. So, the Fish are happy, and I’m obviously using less power needlessly driving the heaters.I read a few reviews where people were trying to use this unit strictly as a failsafe for a runaway temperature condition (having the heater itself control the temperature, and hoping this unit would simply turn it off in a runaway condition). This unit and its parameters and alarms are not designed for that. I use it by cranking my heaters up to around 80° - a temperature my tank should never see. Then I let this temperature controller handle it at a more reasonable temperature of 74 to 75°. So even if this unit was to fail “on” somehow (basically impossible), the upstream heaters would still only have a potential to heat up the tank to 80° until their own thermostats would trip off. So it’s basically a triple failsafe at that point.I’m using this with the jinvoo smart app. I think there are a few other apps it will work with. But it paired up right away, and I have many other Jinvoo smart devices, including some of my Fishtank lights, on the same app (on a separate vlan of course!).Last point others have also hit on, make sure the two temperature probes are located close to each other. The point of them is to be redundant at the same point of reference. So if you spread them apart and have two different temperature readings it will assume a problem and halt operation.This little guy is pretty cool, and one of the most practical smart devices in my setup.

I have 5 of these now, the last one being added to my 15g brine shrimp culture after the heater killed a very dense population over night.I'm just not going to have an aquarium, or culture that uses a heater without a monitor on it.It is so easy to use, just look at my phone and know the temperature, alarms go off faithfully if there is a problem, I have yet to have one fail.I even have one on my saltwater drum so I know if the temperature is good for a water change.I love the wi-fi feature, but also the bold red digital readout is easy to read in most any lighting condition. In addition to alarms on my phone, it has an audible alarm anyway.

Works perfectly. It takes several tries but it does connect to wifi. I keep a fan plugged in. Works great to cool my aquarium to the desired temperature. The led is easy to read. Fan turns off when it reaches the cool temp setting and turns on soon enough to keep the tank within 0.3 degrees of the high temperature. I am pleased with the purchase and would buy again.

I purchased this about a month ago and wanted to wait a bit before writing a review to get familiarized with this temperature controller.I purchased this temperature controller along with 2 x 300 watt Eheim heaters to moderate the temperature of my pond during the winter months. Set up was easy. I took the contents out of the box, plugged in the controller and went through the process to get the controller registered with the Inkbird app on our WiFi. After getting that set up, I installed the controller unit beside my pond. And connected the heaters to the controller.This controller has 2 probes, however the controller averages the temperatures of both probes. If there’s a fault with any of the probes, the controller is supposed to alert of a malfunction. Fortunately, I haven’t encountered this (yet).I have my pond set between 60 (T1) and 70 (T2) in the app and the controller and heaters do a good job at maintaining the temperature and keeping it within this range.UPDATE: Almost two years outside on my patio and still going strong! The front of the unit is a bit yellow/brown from sun exposure, but it's still doing its thing! In addition to a testament to its longevity, I discovered another cool thing, this Inkbird controller is compatible with the Smart Life or Tuya app which works with TONS of smart devices including smart plugs, and other smart devices. I have several outdoor smart plugs on the Smart Life platform that control various components in my pond including pumps and lights. I've already tested this out in the app, but through Smart Life, I can have this Inkbird controller turn my pond pumps on and off based on the pond temperature even though they're plugged into a separate device. When the water temperature gets too cold, keeping the pumps on to help circulate the warm water near the heaters that are plugged into the Inkbird helps distribute the heat. Now this can be done automatically! The Inkbird can almost literally tell the pumps to turn on via Smart Life.

I bought this to mount next to my 150gal and give me a digital display of the temp and an iphone alert if something goes wrong with the temp.It serves those purposes.The app is really simplistic. The controls on the device even moreso. Having two thermometers seems nice, but the wire leads wouldn’t allow the sensors to be more than 7-8ft apart, and that would only be if the head unit display was centered between them. On my 150gal, with the display on one end, the farthest lead wire is stretched completely out to reach the other end of the tank.The thing works. The temp it displays matches the thermometer I have floating in the tank. The display is bright and large enough to read across the room. The alarm is loud enough to wake me from a dead sleep. The app links up and works.