Invisible English Disc Adhesive Large Plate Hanger Set (4-2 Inch Hangers)

Excellent, prompt service and good packaging. Easy to trim if needed (I tried it just to see) and application is very simple. It seems very secure hanging on the wall. No experience with attempting removal, but if I'm worried about it it would be easy to trim off the metal hanger loop and leave the flat disc on the back of the item. I'm very satisfied - this was a wood hand-painted plate I didn't want to drill or pound anything into.

While the side you must rub with a wet finger isn't marked, if you look for the shiny side then you've got the glue side up! Three seconds, rubbing in circles is just about perfect. Then put it on the back of your plate, applying pressure while it dries. Would I recommend these to fragile, breakable antique plates? Probably not. I used these on my light as a feather, Alice in Wonderland plastic plates and it made hanging easy and fast. While they are very small, it doesn't matter as long as you have the hanger you need sticking and staying. These worked great for my needs. For what I got, I think they charged too much but I am still very happy.

At first I was worried about using these instead of the wire ones, but they hold my plates well and the plates don’t stick out awkwardly from the wall. I’ll never use any others.

Like these for hanging plates. Not good for decorative baskets, but I don't they claim to be. I tried anyway, and the fact that there is not a smooth, uniform surface to stick them to made it hard to secure to the baskets. Great for smooth surface items, though.

I like the fact that you just stick them on. I have a collection of Mexican plates that I love. Out of 10 plates, I lost one when a door was slammed and a plate fell off the wall and broke. The adhesive did not hold. I would use them again.

I recently acquired some charming, old collector plates that I wanted to hang on the wall above my kitchen cabinets. The only plate hangers I've ever used are the old ones with the springs and grabby, angled bits that show on the front, but this little thing is completely different. You basically glue it to the back of the plate (with glue you can remove later, if you like), let it set for a while, then hang that sucker up. The only thing that shows is your plate! Pretty neat! I'm very pleased with this purchase, and I'll be buying some more for some other plate decor I'd like to hang flat without the hanging hardware showing. A+

This is the right system for my application. I was looking to display some demi-tasse teacups and saucers in my shabby chic room. The discs are easy to use and seem secure enough to trust. I put the disc on the back of the saucer and tied a ribbon through the loop, over the top edge of the saucer and through the handle of the cup, finishing with a small bow. I guess the "proof is in the pudding". They've been up for a few weeks without a problem. Make sure you follow directions about activating the glue, pressing out the bubbles and allowing to dry well before hanging. The best part is that they're invisible, easy to use, inexpensive, and can be removed.

If your like me and didn’t read the details you’ll be surprised to know there is a process to applying these that involves water and 10-20 minutes. No easy peel off 3M style backing. If these don’t work and my plates fall off the wall I’ll be updating. Fingers crossed.

Éstos adhesivos resultan prácticos para colgar los platos o platones decorativos o de recuerdos de ciudades visitadas en los viajes; aunque creo la argolla está un poco grande y podría ser más pequeña de acuerdo al tamaño del adhesivo

Please check size of plate before buying .not situated for larger plates . Very expensive. Otherwise seems to be good product

Didnt expect it to work well- but it does and very simple to install.Price a bit high i feel