Happybuy Mist Maker 12 Head Ultrasonic Mist Fogger with Waterproof Power Supply Ultrasonic Fogger Humidifier Stainless Steel Pond Mister Fogger 7kg/h

I used this for Halloween in addition to my fog machine. The two made the best, thick low lying fog for my yard display. It is worth the price even if you don't use it as a fog machine enhancer.

IMPORTANT UPDATE: After 1 year or so of solid use, You need to open each one of the heads and clean the gunk from inside of them with Windex OR sooner if it starts to slow down the amount of steam it puts out. You just need some paper towels / Windex and lightly dab / wipe over and over until the black gunk is gone and the springs are shinny again. The disc's can have black circle marks on the back of them without issues.Temperature is -8f outside and humidity inside is 20% in this 2500 square foot home.Container $5Water filter here on amazon. $304 computer fans for $20.Total $180 and we have a whole house humidifier.2 hours of running this and we are at 47% humidity. I can feel the difference in every cell in my body.We have 2 $50 humidifiers and they could barely get one room to 35%. This is doing the entire house really fast.You can't see by the picture but it shoots the mist 6 feet in the air. We are very happy with this purchase.

ran great for 2 weeks and now the transformer went bad

It works great but idk if the minerals in my water are damaging it but doing good

I've only had this item a month and haven't used it for long periods of time, but so far it works great!At one point I thought it wasn't working because I misunderstood the instructions. I thought the water levelneeded to be 2cm above the atomizer heads. I didn't realize that the the black plastic knob on top was a water sensor and the level needed to be 2cm above that. As soon as I took care of that everything worked great!

I have purchased THREE of these misting units for my greenhouse. Each one has failed after about a year. BE SURE TO PURCHASE A WARRANTY if you decide to buy the Happybuy Mist Maker 12 Head Ultrasonic Mist Fogger.

We used the unit for a plant room humidifier with automatic water fill that maintains exactly the right water depth. The device worked well for about 18 months under fairly heavy use, but then the power supply burned out. So now the unit is dead. I checked with the seller and after a week of back-and-forth flowery but meaningless communications they denied warranty coverage which is only 1 year. I knew that and had not asked for warranty coverage. I had simply asked to purchase a replacement power supply. They ultimately said they do not allow you to purchase a replacement power supply. You have to replace the entire unit. Or, they suggested taking it to a local repair shop. I took the top off the case and as you can see in the picture, the case is poured completely full of an epoxy potting compound. It is fundamentally non-repairable. The area where a hot component failed and burst through the potting compound can be seen in the photo. The power supply looks robust, but with a 12 head unit it runs quite hot, IR shows 135 degrees F in some areas of the case-- too hot to hold your hand on it. Running at that case temperature, the product engineers surely recognize that the solid-filled unit operates with much higher internal component temperatures. So hot that it pretty well guarantees a severely limited lifetime. No doubt their testing has shown that lifetime generally extends beyond the warranty period. It's a cynical design practice, but probably valid in most cases.

Makes lots of vapor. The power supply gets hot