Custom Install PartsDouble Din Navigation Stereo Bezel Dash Install Kit with Standard Wiring Harness and Antenna Adapter - Grey Compatible with Jeep Grand Cherokee 2005-2007

I liked that the color matched up pretty well with my existing trim however clipping it into the dash was a little bit off and one of the snaps broke. The universal mounting brackets did not work for me though, I had to purchase alternate brackets for the install.

Item is good. Now they need to mention in the description that the harness will not work on amplified vehicles. On these you will have to get the ignition power wire from the fuse box or somewhere else. If you want plug and play harness you will have to buy different one like the Metra Axxess CHTO-013 for amplified vehicles.Antenna adapter is fine.Now the bezel. People need to understand that not all double din stereos are the same. We had to choose between Pioneer AVH-X3700BHS, Kenwood DDX371 and SONY XAV-62BT. Only the Pioneer fitted well within the opening. For the other 2 we had to trim few mm on each side. Decided to go with the Pioneer. The only thing we had to trim was the small lip on the inside (not visible) so the face was flash with the trim.It is pretty good for aftermarket product. The only thing is that it's way overpriced. But since there is no one else to make these they can do that. My opinion it shouldn't be more than 50 bucks. That's why I gave it 4 stars.

So, I like that the dash kit fits well. It's as tight and easy to snap in as the factory piece. However the color is a close match but noticeably different.The real pain came from having to splice the Ignition/On 12V wire lead on the Pioneer receiver to the back of one of the cigarette lighter plugs. Maybe this is a common problem others have seen before, it was my first of many aftermarket installations. In my past experience, the harness has always worked fine. It took me awhile and a volt meter to figure out the problem.If you are doing an aftermarket replacement of the factory unit on a 2007 Jeep GC Laredo 4.7L, like I was, be prepared to splice the Ignition/On 12V lead for the head unit to another 12V wire.

I had to trim about 1/4 inch of all sides of opening to get a 6.2 double din Android radio to fit, which irritates me because that's how I destroyed the original bezel - Too tough of a job for any of the dremel attachments I have. For the 07 Grand Cherokee the wiring harness is useless if you have the Boston Acoustics premium sound system. For that you need a wiring harness that talks to the computer.The plastic is softer than the OEM bezel and you kind of have to squish it to push it on,It will do its job, but for the price I'd expect more.

Decent item but wouldn’t buy again. Overpriced for what it gives you. Plastic is flimsy and the clips don’t stay attached. It’s best to just remove the clips from the original bezel and attach to the replacement.

Some stereo stores claim double DIN radios are not compatible with 2007 Jeep Grand Cherokee. Not any more! This unit looks like original equipment and my installation went well. Perfectly matched my dash color too. Cabling was exactly what I needed. You have to move AC vents over from original Jeep radio bezel but that was easily accomplished in just a couple minutes. Order arrived quickly. Although the shipping box was completely crushed upon arrival the product was completely unharmed.

Product was as described. Fit well. Satisfactory quality. I would order from them again.

This was a perfect purchase! Fit for my Jeep Grand Cherokee is perfect! Shipping was fast. Love it!