Flash Furniture Jude Tempered Glass Computer Desk with Pull-Out Keyboard Tray and Crisscross Frame, Small Computer Desk for Home Office, Cherry/Clear

I just finished putting this thing together, and I am totally impressed. Not only was it a great price, in my opinion, but also a great product. If you like the design, do not hesitate. Full assembly is required, because it comes completely broken down ... NOT a partial assembly required situation. The instructions were honestly minimal ---- consisted of a few pictures, which was a little frustrating at times, but everything ended well. The end result was strong, stylish, and stable. Really couldn't ask for more. I was impressed with how everything lined up, and came together without any issues, and no missing parts. I had to undo and redo a few things because of the vague directions, but overall I'm happy and impressed. Would recommend, and would definitely buy again.

Very sleek good looking desk, yet surprisingly sturdy. Very compact. Keyboard tray is comfortable and large - enough for a keyboard and a mouse. The tray is attached to the frame pretty well and rolls in and out smoothly. Exactly what I was looking for - I moved my desktop to the living room and attached it to the TV but needed something to hold the monitor. Was looking for something small and pretty enough for a living room and not a student desk - but with a keyboard tray. This desk fits the bill perfectly. Other reviewers mention that the assembly is too difficult. I wouldn't say that. It is a lot of parts indeed but they all fit well and everything is pretty logical. My only complaint is that the instructions are printed too small - is was hard to see what's on the pictures. Wasn't too much of a problem though. It took me about 90 minutes to unpack and assemble - not too bad. No heavy lifting required - I am a small woman and I easily did it alone.

An attractive, very sturdy (if assembled properly) computer desk for the price. As many have mentioned- assembly instructions leave a LOT to be desired. I've seen worse in stuff coming from China, but these are pretty poor. Here are some assembly tips that would have saved me a lot of time. If I had to put another one together- I'm guessing I could do it in a third the time. Several of these tips are in the comments but I'm consolidating them in one spot: 1) Leave all bolts/screws a bit loose until completely done and then go around and tighten all. Holes don't always line up properly and a little "jiggle room" can be helpful. 2) The only screws that can be tightened fully is the first step- I'll call it step 0 since it's above step 1, mounting the keyboard glides to the brackets. These screws are difficult to get started but do work and get considerably easier to screw in once they get a few turns in. Have the right size screwdriver and apply generous force. Mount the glides as far forward- towards the front of the bracket that the holes will allow. 3) Others have mentioned that the keyboard drawer does not pull out far enough, I agree. I have a gel wrist rest that sits in front of my keyboard and that causes the function keys and even part of the number row on my keyboard to be under the glass top. To resolve this I mounted the glides as far toward the front of the bracket as possible (mentioned above) and also the keyboard drawer when fully pushed in is a little over an inch inside the glass top. I drilled new pilot holes for the screws on the bottom of the keyboard drawer 1 1/4" closer to the back of the drawer. This pretty much resolved the issue. 4) The round tubes that make up the frame in most spots have a concave or "dented" hole on one side of the tube. That is the side the screws go in otherwise they will probably not be long enough. 5) The screws to mount the glass top to the frame are barely long enough and have a blunt tip which is difficult to get through the cork "pad" on the bottom of the aluminum mount on the bottom of the glass. I used the allen wrench to punch a hole through the cork and into the cavity. It is also difficult to get any leverage on the screws for the front tube as the keyboard drawer is in the way. I found it easiest to put the glass top upside down on the floor and put the frame on top of it. Insert the allen wrench all the way in to line up the holes, some manipulation may be needed. Enjoy and good luck! :-)

The desk itself seems pretty sturdy and was easy to put together except for a case of mistaken holes that led me to manhandle it more than I needed to, which I had to go back and fix. If you buy it and you're having to put a lot of energy into getting holes to meet up, *you're using the wrong holes.* The reason I didn't give this desk five stars is the keyboard tray. There's no cord guide for your mouse and keyboard cords, which is kind of annoying, but there are two more glaring problems. The tray slides in and out using ball bearings in a track THAT IS GREASED. When you set your hand down beside your keyboard on the tray, your hand gets covered with grease. The tray DOES NOT LOCK IN PLACE whether stowed OR when fully extended. So when you're typing, your hands are constantly pushing the tray under the desk, while your knuckles hit the worktop, and you lose the ability to type. It's infuriating. I WOULD just buy a new keyboard tray and tracks, but I know that the holes would most likely not align with the ones in this specific desk! So because I cannot afford a new desk, and I need to be able to work, I have TAPED (Taped [TAPED]) the tray in place so that I can type, and I have covered the greasy tracks with tapes so that I can rest my hands without getting greasy. If you like grease and not being able to type, by all means, this is the desk for you. It's otherwise fantastic. *Mwah*

för att montera måste jag använda mycket verktyg för att borra och gänga visa delar det fick jag bara 20% skamlig rabat för detta

naja, ehrlich gesagt: Anfangs war ich sehr skeptisch 🧐 Aber der Schreibtisch ist relativ zügig aufgebaut, der Stand ist robust und nicht zuletzt noch angemerkt: Stylisch im Aussehen 👍

le support a clavier est trop petit, et les instructions vraiment pas clair pour le monter. et la qualité vraiment tres faible

Es tal y cómo se presenta en las fotografías. Quizá algo complejo de montar, pero con paciencia se consigue. Los tornillos de las varillas finas de la parte de atrás no encajan. Pero he podido solucionarlo. Estoy contento con la compra. Era lo que buscaba.

As previously mentioned , holes are misdrilled. I am only at the begining of the assemly , not sure what else will pop up. Update: furter had to use different screws, but even with that table is not stable. Wasted few hours with this one. After i wanted to put on the glass top, i saw that glass is completly shattered. Be nice to yourself dont buy this.