FLYPROFiber- LC to LC Fiber Patch Cable OM3 3M/10ft, Length Options: 0.2m-200m, 10GB Multimode Duplex, 50/125um Fiber Optic Cable Cord LSZH-3Meter(10ft)

Q: Is this cable resistent to water ingress (if installed outdoors in conduit?

Well in principle should be resistant to regular water (e.g. some rain water, nothing potential corrosive e.g. sewage water etc.). There are no electric parts in it, so water cannot create shortages. It is rated from -20°C to +70°C. If run in a conduit and it is rarely/occasionally exposed to water, I wouldn't worry at all. However, it is not an outdoor rated cable that can be permanently exposed to direct sun, used under water, or buried in the garden.

Q: Can this be used replace the google multi-gig fiber cable from the wall jack to the router? i'm looking to move the router to another room.

As long as you have SFP port it will work or check your female port if this cable will connect correctly

Q: does this work with? as i need it for a Ubiquiti Networks EdgeSwitch 24 250W (ES-24-250W) https://a.co/d/6adtLPL

If you want to use this jumper with this device, you will need to use it with a multimode optical module

Q: is it plastic fiber optic? is that I need to install some pipes throughout the house and there are many curves.

According to a specification I saw on their website, it says "Owens-Corning" so it would definitely be glass, but the manufacturer also says it is "bend insensitive" and that the "minimum bend radius" is 7.5mm (which is rather a tight bend radius IMHO). "Bend sensitive" would make the minimum bend radius to be about 15X the outside cable diameter (NOT to be confused with the diameter of the very tiny glass fiber inside the multi-layered construction found in this type of fiber optic cable). "Bend insensitive" has much to do with the interior construction layers of the fiber optic cable which then 'reinforces' the glass fiber to prevent damage in places where it is possibly tightly bent around corners or when pulling into conduit or through conduit fixtures. Just an "FYI": as a "rule of thumb" 7.5 mm is pretty darned close to the diameter of an 'old fashioned' graphite (* AKA "lead" *) pencil, if memory serves.

Product ID: 282228589

Secure Transaction

Details

Brand
FLYPROFiber
Connector Type
Lc to Lc
Cable Type
Fiber Optic
Compatible Devices
PC Router
Special Feature
Data Transfer

📏3M Length with Wide Range Options

📶10Gbps Multimode Speed

🔄≤0.3dB Insertion Loss Stability

Description

🚀 Connect at the speed of now — don’t let your network fall behind!

BEND RESISTANT DESIGN - 7.5mm minimum bend radius ensures stable transmission even in tight, high-density racks—no signal drop, no stress.
SMART INSTALLATION MADE SIMPLE - Embossed A/B labels and adjustable clips speed up setup and troubleshooting, keeping your network running flawlessly.
FLEXIBLE LENGTHS FOR EVERY SETUP - Choose from 0.2m to 200m to perfectly fit your data center, LAN, or commercial environment without compromise.
BLAZING 10 GBPS MULTIMODE PERFORMANCE - Optimized for 10G/40G/100G Ethernet, powering your high-density networks with ultra-fast data flow.
PRECISION ENGINEERING WITH LSZH JACKET - Eco-friendly, low-smoke zero halogen jacket plus Japan-made zirconia ferrules for superior durability and signal integrity.

The FLYPROFiber LC to LC OM3 Fiber Patch Cable delivers reliable 10Gbps multimode connectivity over 3 meters (with options up to 200m), featuring low insertion loss (≤0.3dB), a bend-resistant 7.5mm radius design, and eco-friendly LSZH jacket. Engineered with precision Japan-made zirconia ferrules and clear A/B labeling, it’s ideal for high-density data centers, LANs, and commercial networks demanding stable, high-speed fiber optic performance.