12" x 5FT Twill Weave Carbon Fiber Resin Kit

Used to fix a $4,000 power chair with extensive damage. Strong and easy to use, blend right in with the factory carbon

As I said in the title, the Quality of the Resin is superior, I have been able to use other Resins from other manufacturers before, 3 to be exact, and it is more difficult to work with them, both because of the drying times and the fact that many bubbles were trapped under The Resin, despite being careful when mixing it so that it does not fill with air, on the other hand, the Venom Carbon Resin was easy to work with, as it was less thick it was easier to eliminate the bubbles that remained and a few that I could not eliminate with the heat gun were eliminated by themselves when I returned to check the already cured piece, this Kit is incredible, I will surely buy it again in the future, I recommend it, in my case it was to do a Skinning job, I tried to give a forged finish with the Carbon fiber and traditional Twill, the entire experience was excellent, I recommend this product just make sure you follow the manufacturer's instructions to the letter

Well the cloth was taped and once I ruined a bit of cloth untaping it was fine it's very fragile to be taped closed i think anyway after that was fine epoxy and hardener both worked well together but dont listen to the instructions they state you have 23min before it starts to set up but it's more in the neighborhood of 2hrs my first piece I al.ost ruind because I thought I had to work fast but I didnt so I put my piece down way to soon but after I found out the instructions were bogus I was able to finish without any more problems nice fiber nice epoxy

Use this along with multiple layers of flex seal to repair two cracks in the water tanks on my boat. This was a great alternative to Welding and I think a more reliable result.

never before have I carbon fiber wrapped anything, but I can see I'll be doing it more ofteb now. I wrapped a 3d printed object with this carbon fiber, after learning a few tricks, like spraying with spray adhesive before handling, helps keep the cloth together nicely. then I learned I can cut it with my 40watt laser cutter, that was the biggest game changer. I ended up spray adhesive my pieces to my object then wet them down real good and that resulted in my best looking work. since I didn't have peelply or vacuum set-up, I wrapped each part in saran wrap then tightly wound electric tape around that, giving me a nice tight fit. after some sanding apon unwrapping it came out very nice and smooth. I can't quite put a picture up to show it off because it's a customer's product and it's yet to have a patent, but I will be using this kit again in the future and quite often I'd expect, after seeing how easy it is to do. oh and it's definitely strong, very strong for the single layer wrap i did, I didn't expect that much strength in a single layer. this can add strength to many 3D printed projects, I wish I had tried this years ago.

Just perfect for what i needed would buy this again

Never used. Resin is hard as a rock in original bottle.

The resin kit was REALLY easy to work with. I had done a ton of research on how to properly mix the resin and lay carbon fiber and even though this was my first project, I was AMAZED at how well it turned out.They actually forgot to include instructions in my kit so I had to go to the website to find them, luckily they have it posted there. I also didn't use the carbon fiber fabric they sent as I had bought a different fabric I wanted to try. The piece I skinned in carbon was about 1ft x 3ft and I only used about half the bottle to apply 4 layers of resin before leaving it to cure.A tip for anyone regarding air bubbles when mixing the resin, I mixed it up for a couple minutes as recommended and then I hit the resin with a heat gun (very low heat and only a couple seconds) to pop the air bubbles.Then when I poured the resin, it laid flat and smooth and even after brushing it out, didn't have to worry about the air bubbles.I was able to work with this resin inside the house with a window open just for airflow but there is no toxic odor or smell which was a huge bonus. My wife didn't even notice the smell from just 5ft away.