Mining Rig Case 8 GPU Mining Case with 4 Powerful Cooling Fans and Mining Motherboard (Without GPU, PSU) for BTC/ETH/ZEC GPU Mining Rig

IMPORTANT REVIEW. PLEASE READ. Unit itself is solid and works well. Really loud at 120 DB. Similar to an S37 but it’s not. The S-37 model has 65mm between slots. Here is some REALLY important things to know. You MUST use wired mouse and keyboard. To power the unit you MUST plug in the first two slots closest to the mobo. Download your OS to the CPU provide your own little hard drive and I would spend the extra $10 on an 8 G DDR3 memory. Don’t forget to download your drivers to the OS once it is operational or your GPUs won’t work. Other than those little tidbits of info, the CPU has inadequate cooling and no fan so don’t try to use the CPU for mining!!! Good luck. It seems to work well enough with 4 or less GPU’s. Also I got my PS and wiring from Parallel miner. So attempted to install GPU #5 and it just won’t work with more than 4 GPU’s. Set all the bios correctly. Well, all that are available. There’s something where only the first 4 GPUs in the board will work. They recommended a 258G hard drive. It didn’t work. I’ve tried everything. I’ve spent over 100 hours trying to get this to work now. Still stuck at 4 GPU’s. Still working with tech support to try to resolve the issue over a month later. Not sure where it will end up but thought people should know.

Was mining perfectly fine with some 2060s and 1660s.I switched up the electricals (110v outlet to 220v outlet with a pdu) and a new 1800w psu, added 2 1080tis which I took out cus it wasn't showing up on hive.Sometime later it started randomly disconnecting, but the fans and the gpus would remain on (not mining and no screen output).I cleaned it up and booted from a msata m2 instead of the usual USB stick. The system ran fine for 10 minutes then stopped posting all together.Ive resitted the ram, cleared cmos, changed the little watch battery. Now when I power it on, the case fans spin, the msata gets power and lights up, but no post, no lights on the ethernet cable, no power on gpus, no video output.Is it possible to get a replacement motherboard to fit perfectly in the case?I believe the product itself is good and works, I just didn't clean it and give it proper maintenance.

I liked how it looked and how sturdy this is built .But it was so loud its overwhelming . My other mining rigs produce same amount of Hash rate but less power and less sound . So no I would not recommend this rig .

This case goes hard. By far the easiest mining rig I have ever assembled. Good case to start with for a first time miner 10/10

If you want to use the bigger GPU’s like Rtx 3090 you have to modify it for sure and also the bigger GPU’s take 3 x 8 pin plugs and this thing has wires for 1 each