Precision Upfit Micro3 ATM Add-A-Circuit Fuse Tap Link with 5A Fuse micro 3

If using for 2017 Lincoln MKX it would not fit in the fuse location for 10A. Had to shave off the small strip on the corners on both sides of the fuse tap

Worked perfect ti install a dash cam in my 2022 Silverado

I had to shave some plastic off the edges using a hobby knife so that it will fit.

Fuses will not fit, almost like the blades are too wide. The depth of the tap is too short so it won't go down into a spot because it butts against othe fuses it hits the edges of the fuse box area. Terrible design.

These fuse taps made my GMC Sierra 1500 fuse box so much easier to hook into for the new VIOFO dash cam.

I successfully used this fuse tap to hardwire my dash cam in a 2024 GMC Yukon. For some reason almost all of the micro3 fuse taps available on Amazon need to be modified according to reviews. I don’t understand why the design hasn’t been corrected yet, this iteration of GM vehicles have been around for almost 5 years. I took my Dremel with a sanding head and filed down the 4 corners making them nearly flat.I knew this going in, so I’ll only deduct 1 star for having to modify it. The fuse holder portion was WAY too tight! I bent the leg of a fuse trying to insert it. I eventually got both fuses seated but it was not an easy task. I’ll deduct another star for this.It otherwise gets the job done and my dash cam is working fine. You’ll likely run into this issue with any of the available micro3 fuse taps.

check connectivity between the pins and the sockets. both of mine showed up with the outer pin connected to both sockets where they should not be connected. using a micro3 fuse in both slots would then have two current paths from the middle to outer pins. I ended up just using a micro2 fuse between the middle pin and tap pin to avoid adding a parallel connection to the outer pin.

The media could not be loaded. Worked perfect for the realay fuse tap I needed to wire up my light bar into my high beams 🤪