Spigen Tempered Glass Screen Protector [GlasTR EZ FIT] designed for Galaxy Watch 5 (44mm) / Galaxy Watch 4 (44mm) - 2 Pack

I usually dislike screen protectors because a lot don't work as well as you think they will. This one was awesome though! The place holder that fits around the watch perfectly centered the protector and it was so simple! No bubbles. The screen protector covers the watch face perfectly, feels durable, and does not interfere with the touch screen. This is for the Galaxy 5 Pro. I would definitely recommend this screen protector.

I think that this type of system with the EZ Fit Tray is the only way to get proper alignment onto the watch face and this product works great. Trying to line up screen protectors by hand has never worked for me and this is very easy to use. Plus, you get two! I bought this about a year ago and I finally had to replace the watch face protector after smashing it up while I was working on my car. I banged it so hard that the protector face cover cracked in two places and broke on the edge. I was a bit worried that the glass underneath was damaged but the protector did its job. The original glass was in perfect condition without a scratch. I have been extremely happy and satisfied with this product and would definitely recommend it for adding a protective layer to your watch face and will definitely buy it again if I need one. As for the price, considering the cost of my watch, it's worth protecting. The only other recommendation I would make is to buy a case protector if you’re at all hard on your watch or use it in occupations like construction or auto repair or anywhere there is potential for damage. I have both screen and watch case protection and both have been very good at protecting the integrity of the watch. Again, I am very satisfied with this Spigen EZ Fit tempered glass screen protector for my Samsung Watch Pro 5.

Perfect fit, very easy install, just follow the online video. Accidentally hit my watch hard against a wall with this protector on. The screen protector cracked, but the watch was still perfect. Cheap insurance, comes as a 2-pack, great product!

I almost never review a product, but this is an exception. This product is well packaged with brief but easy-to-understand instructions, and very easy to apply. It's clearly high quality and fits my watch perfectly. As long as you do your part and clean the surface the application is 100% clear and any little bubbles can get pushed out. It comes with a glass cloth, wipes, dust removal stickers and a good quality "bubble pusher". I only wish I was coordinated enough to stop slapping my watch against hard surfaces and damaging the screen protector. When I have the watch surface itself has never been damaged. Good product! *** Update -- I continue to be a clutz and this continues to protect my $400 watch8. Still no damage to the watch face after another few "encounters" with hard surfaces. It's worth the extra few dollars for a great protector.

I used these screen protectors while I had my Samsung Galaxy Watch FE, and it was fantastic. The installation was super easy, and it provided solid protection without affecting the touch sensitivity. However, the price feels a bit high to me for a tempered glass screen protector. You can find similar protectors at a lower cost that offer comparable quality. That said, the quality is definitely there if you don’t mind the cost.

I've used Spigen cases before - on my current phone (Galaxy S22) and two previous ones - so when I got a Galaxy Watch 4 (40mm), I was confident that this screen protector in conjunction with a Spigen case for the watch would work great. And for the most part, this screen protector is exactly what's advertised. It's super easy to install. Each of the two screen protectors comes in a plastic "installer" that you position over your watch face. It's a fool-proof way to make sure the screen protector is aligned to the center of your watch face. All you have to do is peel some stickers and press down. The tempered glass screen protector doesn't impede any of the touch functions on the watch. This is true even for the bezel functions, where there is a slight gap between the edge of the screen protector and that of the watch. But there are some caveats, when using this screen protector with the Spigen Armor Pro case (https://amzn.to/3WKAoIm). You will want to give the screen protector adhesive sufficient time to bond with the watch face before putting the case back on. In my excitement, I wasted one of the two screen protectors by not waiting long enough. When I put the case back on, it actually pushed to screen protector off center - and there is no way to reliably get it centered again. I had to remove and junk it. I waited over a day after installing the second screen protector (again, super easy to do that) before putting the case back on. This time, the screen protector was fully adhered to the watch face, and didn't move. However, the pressure from the all-around case formed some air bubbles under the screen protector - I've circled those bubbles in red. I couldn't use the included squeegee to push the air bubbles out, but found that over the next day or so, the bubbles worked their way out on their own. A minor annoyance at best, so no deduction from my 5-star rating. In the end, I decided to just stick with a metal band (https://amzn.to/3PYOUKd - highly recommended), and haven't put the Spigen case back on. The combination of an all around case plus screen protector is probably overkill anyways. TL;DR - great screen protector, super easy to install, but don't use it with an "all around" case.

I am rough on watches, in particular watch faces. These help make my Galaxy Watch 4 screen last a longer so I am all for them. I've ordered these twice and have had zero issues with how simple the installation is, or how well they adhere once installed. It is always a painless process using the jig to align the screen protector and press it on. ZERO bubbles every time!! The only thing I hate about them is is the tiny cracks that develop along the edge when I inevitably hit the watch, or something hits the watch. That's really not a problem since they are supposed to crack before my watch face does. However, I did receive one of them cracked inside the box. Thankfully, they come in a two pack so I just cleaned my screen with the included wipe and installed the other one in the package. I will just have to order another package sooner since I could only use one out of the two in this package. NBD. Now if only someone could make a phone screen protector that was as easy to install that came in a alignment jig like these do. Then it would be super simple to avoid that one tiny bubble that always seems to happen and annoys the crap out of me.

June 2024, year and a half-ish update: It's earned back that star and then some. There were SO MANY scratches and pits in the surface before I finally managed to crack THE FIRST ONE that I cannot recommend this more. And for reference, in the time I've been wearing this screenpro, I've mostly restored one car, started on another (long story) and am fixing up a house. It's held up through all of that. Just buy it. You won't regret it. Note: if it wasn't "slightly undersized for the screen" you wouldn't be able to use the touch ring, it'd get in the way of your fingertip. I was missing the obvious. Monthish update: Bashed it all over the place while working on my car because I'm clumsy, it's got a pair of very deep scratches and a couple small chips on the edge, but it held up quite well and still works fine, sensitivity wise. If it keeps holding up this well I'll give it that star back, lmao. Packaging was great, you get two of everything (minus the squeegee because duh) for ease of installation x2, and it goes on easy ASSUMING you're not a complete dingus who tries to install it with a big bulky case already on. The down side is that as you can see, it's slightly undersized for the screen. I do hope this doesn't cause problems in the future. I will attempt to remember to update this again later, it's only been on for a day now.