GE Digital 2-Way Coaxial Cable Splitter, 2.5 GHz 5-2500 MHz, RG6 Compatible, Works with HD TV, Satellite, High Speed Internet, Amplifier, Antenna, Gold Plated Connectors, Corrosion Resistant, 33526

The Splitter worked great.

I tried 2 "splitters" that I got off my old cable/satellite equipment, but only one TV connected would get a signal, so I purchased this splitter. This splitter worked perfectly, getting a good signal to my Tablo recorder and to the TV input.

Worked for me perfectly in a MoCA setup, easy install.

Works well and as advertised.

There are cheap splitters out there that degrade the signal more than they should. This splitter does not, and therefore works well. Experiencing advertised speeds with cable modem now.

Ok here's the deal...I'll save you lots of frustration if you are an Xfinity customer. The new 10g network they are implementing causes your modem to give a reply powerful upstream signal. I replaced a failing splitter with this and it worked...for 2 months. Then started getting pixelation after an update they did in our neighborhood. I researched after getting blown off by support and told to wait 3 days for a tech. Turns out this splitter does not have port-to-port isolation...so the modem signal overwhelms the TV signal. Look for a 5-1002 MHz digital splitter (which I guess if you go to the Xfinity store they'll give you for free) or they are cheap on Amazon. Even if it works now when they do the update you'll likely have issues if you use this splitter. That said, the splitter is a great design and from what I could tell functions perfectly so I'm not marking it down because of an error on my part. Would highly recommend to anyone with satellite TV! For Xfinity (and likely other cable companies) customers don't buy this one :)

Simple Splitter. Great price for 2 of them. We used them to split the incoming cable line to have one line go to the internet modem, and the other line going directly to the TV so that we could pick up local channels and streaming TV without having to pay for Cable TV service. Sometimes, with weaker splitters, you'll need a "line amplifier" to boost the throughput ... but with these splitters, no amplifier is/was needed. Well worth the effort and price to DIY it, and cut your cable TV bill.

NOT compatible with MoCA 2.x/DOCSIS 3.x set-top box/modem setups commonly found on Comcast/Frontier/Xfinity systems despite claimed 5-2500 MHz range. There's just too much ripple noise in the critical 1000-1200 MHz ranged used for DOCSIS 3.1 OFDM...it will NOT lock. Don't bother.

جيد

Los devolvi

Very simple splitter adapter, with seemingly no, or negligible, amounts of signal loss. I used this in my theatre room to allow me to connect my TV and my MoCA adapter into the same wall port, and I can successfully use both devices at the same time.

Purchased to use as part of a MoCA setup with 1 at the junction and the other 2 at the opposite ends. Functions very well.

El equipo funciona correctamente, la señal de video se ve bien, reemplace un divisor de 900 Mhz por este de 2.5 Ghz lo voy a seguir probando y analizando