Moen Chateau Chrome One-Handle Low-Arc Kitchen Sink Faucet with Side Sprayer, 4 Hole Kitchen Faucet, Separate Flexible Pull Out Spray Head, for Commercial, Laundry, Utility, 7430

Save yourself some money: research the typee of faucet you need to replace and purchase it yourself. Do not ask the plumber to do so-----unless there is the benefit of the professional discount. I saved money by finding what I need here and it was delivered quickly. It is very, very easy to use and made life easier after the long term leaky faucet. The spray and overall quality is very good.

Good quality item. Came with easy to follow instructions. Works well; moves smoothly from side to side; spray attachment works well.

Very happy to have purchased and installed a new Moen faucet (and great service and pricing on Amazon's part always). The faucet was relatively easy to install (save for the limited space under our sink to operate within...you may need to gather a pillow and be prepared to work like a contortionist :-)) and so far it's operation is flawless. The flexible hoses (vs copper hoses and connection of the older unity) are a big plus in my opinion as well. Overall, nice quality and a relatively easy install (~ 35 minutes)....a good value for the $$!

This is a pretty nice stainless steel/chrome kitchen faucet. It's made of decent weight metals although the side sprayer is entirely plastic. I'll admit it is very good chrome on plastic. Having other/previous Moen faucets, I feel confident for its longevity. This is a quality faucet with easy (single sink hole attached) installation with 3/8 water supply lines and snap-in connector for side sprayer.The only complaint I have is the handle seems a bit high and outstretched where I tend to be pushing down a little more than necessary. I guess some getting used to it.1/28/12 UPDATEThe side sprayer drips/leaks slightly when the water is turned on...when I lift the handle the side sprayer will drip a couple of drops of water. First, I removed the side sprayer and flushed the line thinking there may be some small debris causing the problem...still, a minor drip. Now I'm using the sprayer more often thinking this may "seat" the seal or remove the initial silicone that Moen (website) states is used to keep the seal from drying before being used. If the problem persists, I will contact Moen for advice or possible replacement. I will update my review accordingly.2/20/12 UPDATEOkay, Moen's website was correct that the minor leak from the side sprayer has subsided. I'm happy this was a temporary situation but, still, this is a bit disconcerting. I have used and maintained many Moen faucets and valves with continued positive operation. Still, overall, I hold firm to my 4 star rating for this faucet.

Updating the kitchen and was told by my plumber to get a MOEN. Boy, was he right! That old DELTA [https://www.amazon.com/Collins-Single-Handle-Kitchen-Matching-440-WH-DST/dp/B002LKU4VC/ref=sr_1_2?crid=EK6N9DGEY5L9&keywords=delta%2Bfaucet%2Bwith%2Bspray%2Bin%2Bwhite&qid=1702094004&sprefix=delta%2Bfaucet%2Bwith%2Bspray%2Bin%2Bwhite%2Caps%2C256&sr=8-2&th=1} after just 5 years was so difficult to use the handle. The top of the faucet got dinged so easy, because of the very light construction of the whole unit.It would actually rock the base plate and you were unsure whether of not it was going to bend in half. The MOEN is so much more sturdy; the handle and the faucet itself are silky smooth to move left and right and forwards and backwards. The base plate is veeery durable and stable.My only knock is that the sprayer is not "serrated" at the bottom [where it mounts to the sink] so it swivels all over; when you need to use it you have to pull it up and grab the sprayer in whatever position it is in, then point it in the direction you need it. The DELTA had grooves on the sprayed base, so that it was "at the ready" as soon as you needed it. Small kvetch!The DELTA is now $180+ and the MOEN is a bit over $100. The choice is so easy...

Easy install and works perfectly. Looks great works flawlessly.

I took out an old American Standard three hole w/ side sprayer which was the worst part of the replacement. The new Moen had easy installation instructions and a basin wrench was only needed for the removal of the old faucet. I still recommend watching a video on the installation so you can see it done. I liked hearing how to determine which is the hot and which is the cold water taps (the hot is the tap the dish washer is also attached to), when you are under the sink it gets a little confusing.It is now 2025 and have had no problem with the side sprayer and if the previous reviewer has hard water, they might try putting the spray head in a glass of vinegar and really hot water then leaving it there for a while. That would take care of the scale that might have developed.

As I said in the Headline... My dislike Boarders on Hate to do Plumbing... After many many renovations etc... I always had difficulty with Plumbing... I needed a new Kitchen Faucet Set... But I could not get a Plumber over the Holiday's for such a small job...I said, what the Heck.... so I did it myself... The hardest part was removing the Old Faucet...Buying a Moen... made this an absolute pleasure to do... Even with my bad hands... :-)