CLOUDLINE PRO T4, Quiet 4” Inline Duct Fan with Temperature Humidity VPD Controller, WiFi Integrated App Control - Ventilation Exhaust Fan for Heating Cooling, Grow Tents, Hydroponics

I bought this fan to use with my Xtool laser machine. I am extremely excited about how well it works. It was not very difficult for us to install it in my basement and vent it out through a window. It is super easy to use. It is not as loud and the air purifier I was using. I would recommend this fan over and over again. The way it is helping my laser not only function better but keep fumes and smoke out of my room is amazing for the price. This is a great value. It seems to more than powerful enough and is sturdy and looks well built.

The fan works great and has a wide range of performance that allows you to run this thing at any speed between silent and very loud. I use mine as part of a DIY ventilation system for an old apartment and it provides loads of air movement and static pressure. At full blast, I measured its power draw at 165 watts. The fan is notably very efficient and can still move a surprising amount of air at its lowest speeds with around just 5-10 watts of power usage. (Though you won't be ventilating a whole space at that level.) One thing to seriously note though: This fan can be a real safety hazard if not used correctly. It should really have some feature to kill the power easier since at full blast this fan will happily consume any nearby debris and probably result in injury if you were to get your hand in it. There is no built in grill or safety screen. The controller allows for the selection of 10 speeds, but requires you to loop through to the highest speed before it will shut off. Additionally, when you remove the controller by disconnection, the fan defaults to FULL power. I had an incident where the fan swallowed a bag of small screws and I had to hastily chase down the power plug in order to shut it off. I guess as a testament to its durability though the fan didn't seem to suffer any damage. I have since included a shutoff switch in-line with the power cord.

I purchased the AC Infinity CLOUDLINE PRO S6, 6” Inline Duct Fan with Speed Controller to help keep my miner room cool, and it has exceeded expectations. The EC motor is both powerful and efficient, and what surprised me most is just how quiet it runs, even at higher speeds. Installation was straightforward, and the included speed controller makes it easy to adjust airflow as needed. Running multiple miners can heat up a room quickly, but this fan has made a huge difference — it keeps temps under control without adding a lot of noise or power draw. The build quality feels premium, and I can tell it’s designed to run continuously without issues. ✅ Pros: Very quiet operation, even at high speeds Strong airflow to keep miner room temperatures down Speed controller included for precise adjustment Efficient EC motor saves power over time Solid build quality, designed for 24/7 use ❌ Cons: Higher upfront cost compared to budget inline fans Speed controller cable could be a little longer 💡 Tips: Use insulated ducting to further reduce noise. Mount the fan with vibration-dampening straps for an even quieter setup. Pair it with a temperature or humidity controller for automatic adjustments. Clean the fan and ducts periodically to maintain peak airflow. Bottom Line: The CLOUDLINE PRO S6 is a top-tier ventilation fan that’s perfect for high-demand environments like mining rooms, hydroponics, or grow tents. It’s quiet, efficient, and powerful — exactly what you need for reliable cooling in a 24/7 setup.

this is a must grab for serious indoor growers! super quiet, light and compact, and keeps the environment dialed in perfectly. absolutely phenomenal product for the price.

AC Infinity has changed the game of home growing for everyone. This fan is priced very well for the level of quality and features it packs. I plugged it into my AC Infinity AI controller and it detected it without hardly any intervention. Since I am not growing plants, but gourmet mushrooms I needed to disable the AI (broke my heart because its truly amazing) and set it manually at the precise numbers I needed. High humidity and low CO2 for fruiting. I had trouble getting it to accept the numbers I wanted since I was not growing standard plants. Called support and had Judy on the line with zero wait time. Judy was a controller ninja and walked me through the clicks to get exactly what I needed set up. Perfection! She didn't ask a million questions, didn't have to go through a painful data collection pre call, just picked up the phone and asked how she could help me. I explained my issue and she had a solution in minutes. Made sure it worked for me and was a pleasure to work with. I don't call support for anything, even at work, unless I am totally dead in the water with no options. AC Infinity made me rethink this stance. The fan itself works great. 10 different settings. Perfect for a mushroom grow tent thanks to the true waterproof rating. Humidity won't even touch this thing. The fan looks sleek and runs silent. I see there is a sound damper available but can't imagine why one would need it unless they sleep next to the tent because its so quiet. The setup was quick and easy. It moves a ton of air and keeps the FAE spot on in my tent. I love the AC Infinity products. I already had a fan and filter and 2 humidifiers that I swapped out just so I could use them with the controller and have more matching gear. I want to set up a garden inside now since this system is so easy to use and works so well.

Initial thoughts, I give this 5 stars, but, the speed controller has these 10 small obnoxiously bright LED lights, so I'm whacking one star. They're the white/blue type. Wow, they're like miniature lasers piercing your eyes. They should have gone with red, not the white/blue. The fan is made of plastic, but it's durable. Blades are sturdy. No flimsy materials used. The fan is pretty quiet. Speeds 6+ are pretty noisy, but then again, when you're shoving 730 cubic feet of air into an 8" tube, it's going to make some noise. I find that acceptable. Lots of air flow, which is what we wanted. Once we start using this more, I may be back to update if needed.

This thing is fantastic! I use it in my enclosure for a laser engraver. It's a lot quieter than what I thought it was going to be. It pulls air incredibly well. I have it sitting on top of a desk, and it stays put. It doesn't move around while running, even on high, which tells me that it's well balanced. I like the little remote, too. It makes it a lot easier to turn it on and off. 4-in hoses and clamps fit really well and don't slide off, which was my initial concern. I highly recommend.

I purchased this blower for use with an 8” independent insulated duct system that I installed in my attic to redistribute excess heat from the room my new wood burning stove is located in, to the rest of the house. The blower is very quiet even at full speed can move large a large volume of air. The variable speed control is nice although I do believe it would have been nice that the corded speed control’s form factor matched a US a rectangular switch plate/electrical outlet face plate dimension with and/or a faceplate mounting kit for a clean, permanent installation as the faceplate of the control is just a bit too big. Very happy with the unit so far