Glow in the dark filament

The color is vibrant, consistent, and looks amazing on finished prints—exactly what I was hoping for. It has a smooth, rich tone that really pops, whether I'm printing small models or larger pieces. Print quality has been excellent. The filament feeds perfectly with no jams, and layer adhesion is solid. I’ve had zero issues with warping or stringing, and the surface finish is clean and professional-looking every time. It’s clear this is a high-quality filament, and it’s become my go-to for any projects that need a bright, eye-catching pink. Highly recommend for anyone who wants great results and reliable performance!

Review is for the: "iSANMATE 3D Printer Filament, PLA Filament Glow in The Dark, 1.75mm Dimensional Accuracy +/- 0.03 mm, 1 kg Spool" As with most any filament from the factory... it works best when dried for 10+ hours. Many people report how brittle this filament is & yes, wet filament is brittle. So, dry it first. Then it will work well. I have had great prints with the Glow filament. After charging off a Bright light for 20 minutes, it will last for a few hours. Thicker prints works best of course, as there is more product to glow. Good detail can be printed with this. Important to have the settings correct, as the Glow is actually a PLA+ which melts at a higher temp than PLA. Appears to be a bit stronger than PLA, but not like a CF or PETG. I would purchase again. Be sure to dry it first.

So, I printed the Nokk (Frozen's horse) in this glitter blue filament and it turned out STUNNING!!! The glitter really does come out so well and the blue is the most gorgeous shade of sapphire blue I've ever seen. Even the supports were so pretty to see being printed. The material was brittle enough to actually disconnect from the very detailed model but flexible enough to bend a little as I tried to determine how to uncouple it from it's substantial supports. I would HIGHLY recommend this filament to anyone who's looking for a gemstone blue with a starlight factor. It is just so pretty!

I had heard that PETG is somewhat difficult to print so I had to try it out. Adding carbon fiber to the mix sounded just like the challenge I was wanting. To my surprise, this filament printed beautifully on my Neptune 3 Pro with minimal changes to the generic PETG built into Cura. It's perfect for functional parts (I printed fixing brackets for the MGN12 rail I used to update my laser's x-axis) and the visual quality is much better than most PLA I've used. There is an oozing and stringing issue but after tweaking the slicer settings (temp, retraction, travel), it greatly reduced that problem. The color combo was also a selling point since there is variety without having to shell out $30 each for 1kg of each color. I didn't receive a spool of the brown but I did receive 2 rolls of blue (I contacted the seller but no response but it's a minor issue). Overall I am quite pleased with this filament and going forward I think that I will move away from PLA in favor of PETG--it just prints beautifully.

Very nice filament. The rainbow effect is beautiful and very vibrant. Prints turn out sturdy and smooth. I’ve already printed several little boxes with it and they show all the colors and feel like they’re going to last a long time. There has been zero issues with tangling. Great quality for the price.

Neptune 3 Pro, 210-60 @ .16 Edit: It will clog. Be ready. 86% into a print and it clogged. Only the second filament I’ve had clog. Ok, first, yeah it’s only 20% wood. So if you’re thinking that you can spend a little less and get a wood like appearance than keep looking. The only thing that’s wood-like is that it’s brown. Printed a test cube first and was a little surprised that it looked and felt just like a straight PLA print. The cube was dimensionally accurate. Yeah, 20% wood ain’t a lot and I stupidly thought I’d get at least some appearance of wood. Not so much. Emailed seller asking if there’s something I’m doing wrong and the reply was that it’s 80% plastic…duh. Not so great CS, but yeah ok. So out of the box the filament looks and feels a bit like you’d expect. Semi-rough with a matte brown color. The spool appears to be wound tightly and well enough. The filament wasn’t brittle and easy enough to feed. So I started a 16 hr print to see what I’d get. I am apparently getting a brown print. Not so good one at that. Running at 210 degrees and . .16 layer height this prints very low quality. Really resembles mud or another semi-solid brown substance…usually left behind as waste. Now to be clear I did expect some of this. It’s cheap compared to other wood(like) filaments. This review though is based on results. The results so far are on the low end of what to expect from cheap filament. At such a low percentage of wood I don’t expect this to be too hard on a brass nozzle, but given the reviews of their other filaments I’d recommend a hardened steel nozzle to be safe. Jump printing temp accordingly to avoid a clog as steel requires a bit more than a brass nozzle. At 60 degrees I had no adhesion issues on a smooth PEI plate. It’s PLA+ so it behaves as expected there. 210 prints ok, but that quality is rough. At .16 layers are still very visible on the top and any slopes. More so than what I get from a quality PLA only filament. I guess you could say it looks like wood, if you were carving your model with a chainsaw. Overall I’ll pass on this brand in the future. There are better wood-like filaments and better, cheaper PLA alternatives as well. There a even better browns out there. I’ll find something to do with this, but it’ll be a good while before it’s used up.

It looks good and it’s the same size as listed so you don’t need to worry about that. I made a cross to go on a necklace and if the sun touches it for a couple minutes it could glow for hours. The quality is great and is worth my money. I would recommend this product to my 3d printing friends.

Filamento fantastico, è resistente ed è davvero fluorescente!!! Escono dei lavori bellissimi

Beautiful filament but brittle. Have had several prints fail because the filament would just randomly snap off. This even happened a few times when the printer was off. The prints feel strong under pressure, but when dropped the break easily. Very sad, because it really is a good looking filament, but useless if it cannot be printed.

Very good. Bit tricky with getting settings right though but very nice once that is done.

Come da descrizione ottimo prodotto

non un granchè al buio. ciononostante fa il suo dovere.