1 Inch Fuel Transfer Hose, Fuel Hose 1" x 6' (2 M) for Fuel Transfer Pump with Threaded Couplings Oil Diesel Kerosene Transfer Hose

I needed a fuel hose for an extension to the factory fill nozzle on my F250 gasser and this hose worked perfectly. I used a hacksaw to chop the section I needed out of it, discarding the ends, and connected it to the existing hose with a stainless 1" steel barb. The hose is way more heavy-duty than the factory fill hose, so I have no complaints here. The metal construction meant it wouldn't kink.

Well made hose and fittings. I” NPT fit well.

Very thick hose , comes with O rings at each end and doesn’t leak.

hose crimp came apart within a month of use.

I used this with a fill rite rotary pump with an outlet diameter of 1”. The photo shows a dimension of 1” at the black portion with the screen. It’s more like 1 1/4 there. The hose itself is 1” id so I cut one side and hose clamped it on. Haven’t used yet. Waiting on tank I cleaned to dry out. For 16 bucks it should work to transfer diesel to my tractor unless the clear tubing proves to be incompatible with petroleum

I've used it to drain the diesel tank on my Kubota tractor, both pieces of tubing are able to fit in the tank at the same time if you're trying to clean and replace the fuel, which is part of what I was doing. You can see through the tubing and it works very well.

Standing by. Ready when I need it.

Perfect fit on pump very well built hose