Dracaena.io 120mm - 28mm/1.1 inch Thick Computer Radiator, 14 Tubes Copper Water Cooling Cooler for CPU Heat Sink - Liquid Heat Exchanger Dual G1/4 Thread, Black

Excellent seller. Good quality product for affordable price.

Perfect at gr8 price.

I bought this radiator because the HYTE Y60 case requires a 28mm radiator for the top of the case. This was the only in stock radiator I could find at the time. - The price is a good selling point. - As you can see in the picture, the logo sticker was crooked but easily corrected. Not something worth removing a star for. Some people might like it without it. - All the fins were straight and evenly painted. - After reading other reviews, I’d suggest rinsing the radiator first with distilled water. Some people claimed there was some residue in there’s. Personally mine looked cleaned but it’s probably a good idea to error on the side of caution like I did. - Easy to install and all of the holes lined up. - I pretty sure the distributor ships from Texas. I bought (2) different models at different times and I believe one of the orders took an extra day, ** Overall I strongly recommend this radiator. It’s a decent price compared to the competition especially when there doesn’t seems to be many 28mm available. I was skeptical of the price but I’m very happy with the purchase.

Pro's Quality of the copper and brass is great, It operates as expected for a great price. But this is NOT a radiator for first time builders. With that said all of the below cons are a potential risk for first time builders, and or the unaware. There is nothing inherently wrong with the design, but common mistakes could occur due to finish and design choices. Con's there are some finish issues, the coating on radiator bleeds onto the threads and was sharp enough to damage fittings o-rings (these had to be deburred with a abs plastic scraper DO NOT USE METAL to scrape the thread clean you will damage the threads and cause a leak), second the included screws are not a standard screw that is used in computer cases, so don't confuse them. The small screws are too long, I had to use washers (not included) to take up space otherwise the screws would push through the water jacket and the radiator would leak. Note depending on the fan you pair, you may or may not need to exercise equal caution with the fan mounting. I used Noctua fans which are great, but I have had cooler master fans in the past which its mounting tabs are flexible. If the fan flexes it IS possible that the long screws could contact the water jacket and poke a hole as well. IF the manufacturer were to make a change, a 'shelf' under the screw area to bottom out against would make this a near perfect product. As it is, screws on both sides of the radiator could poke through the water jacket and cause leaks.

I have 2 of these cooling 9800x3d & Asus RTX 5080. Both Overclocked stay cold. Max coolant temp I have seen is 30c with fans set to 20-60% power curve. Room temp 72F

Had space for a 120 and this is great for the price and is made from what it says it is. No aluminum. Here. I also have fittings from this company and they are also great.

I ordered a bunch of fittings and a pump/ res from these guys and that stuff seems fine and so far the radiator seems to be fine but... the paint they used must not have been fully set when they put this thing in the bag it came in. The paint was soo thick and still soft enough to squish around with my fingernail. The longer it sits out the harder the paint gets so I'm pretty sure it didn't cure before they bagged it and finished curing after I opened it. It also stunk like solvent when I got it. I thought maybe it was a design at first but looking closer there's obvious creases from the bag, random dings, and just really bad spots. Not a deal breaker but ultimately not stoked on this terribly poor finish quality. 👎

NO LEAKS!!! That's huge!! Cooling effectiveness is awesome. Part of my whisper quiet build. Why did you pick this product vs others?: Brand.. gotta love brand loyalty. But I'm not disappointed. I cheaped out on a few things... ended up buying them again! I went with this radiator the 2nd time around. NO regrets