10 Pack Promark 3-Section 100 LB Capacity Full Extension Ball Bearing Side Mount Drawer Slides (10 Inches)

So I have purchased the Promark brand several times. They work without issue, never have bearings fall out, etc.The slide is great, the extension is full 20". Purchased the 20" for a bathroom vanity (those are not as deep as kitchen cabinets ... Usually. Just measure to be sure).Two additional things you should consider when purchasing. Screws and back-brackets.Rail sets normally do not come with associated screws. I purchased 7/16" pan-head screws.Back brackets. Now, if you have walls on left/right side of the cabinet box, then you don't need the holding brackets. I, however, usually have at least one side that does not have a wall to screw it to so I purchased the back-hold brackets that Promark sells (ISBN=B07QNB6BFZ). They work great.

Easy installation, slides nicely and seems well put-together. I will update if I have any issues. These were installed to replace some knape and vogt 75lb sliders in 32 inch wide pantry drawers that hold a lot of heavy and dense non-perishables like cans, flour, etc. The knape and vogt had failed with spot welds below the rollers just snapping off and bent metal. 2 months since installing and so far so good.A generic installation tip that I found out the hard way: mark a hole, then drill and install one screw, then mark a second hole, remove the first screw and drill the second hole. Install both screws and slide the inner slider enough to mark the other holes. Remove the slide and drill all, then install. It was tedious this way, but drilling holes with the slide attached contaminated the lubricant and rollers with wood dust. The one with this contamination is still stiff, although it works. I suppose if I was installing more than just the 8 slides, making a jig would help in the drilling process.

I bought these 22 inch slides for ten large garage drawers. They arrived in a well worn USPS flat rate box weighing 36 pounds. Inside they were packed in another cardboard box with shipping straps and arrived unharmed. They measure 21.5 inches long and extend 21.5 inches. They are made with 0.05” thick (18 gauge) zinc plated steel and have plenty of mounting holes that are large, small, and slotted. They are not self closing or soft closing, but have a soft bumper and a mechanism to hold the drawer shut.These slides are 0.50” wide when lying flat, but 0.53” when upright as the ball bearings center themselves in their grooves, so they need to be spaced 1 1/16” wider than the drawer, or 17/32” on each side. The part that attaches to the cabinet has mounting tabs that allow the slides to pull away from the cabinet to accommodate the slides being mounted too far apart. If mounted too close together, the ball bearings will ride on only one side of the track, making them harder to open and close.The slides are lubricated with a clear sticky thick grease making them harder to pull out, but that gets better with use. Cleaning them and lubricating them with a lighter grease might make them slide more easily.My slides came with 80 5/8” flat head mounting screws, a nice improvement over no screws. The slides allow for up to 1/8” tall screw heads, so #8 pan head sheet metal screws work fine, are easily found at home improvement stores, and allow for some adjusting if you use the slots or larger holes. They also come in a variety of lengths so you can pick the length appropriate for your drawer and mounting cabinet thickness.My one complaint is the lack of this sort of technical information in the box, which could be remedied with a half sheet of printed paper.Overall, these are great slides for the price, and would be a solid 5 stars if they included a piece of paper with dimension specifications, screw alternatives, and an explanation of the various mounting holes.

These slides were a great value and work perfectly for my use case. The only knock is that screws aren't included. I've found that #6 or #8 pan head screws worked just fine for me.The slides came packed in a plain cardboard box with strapping. Minor damage to the box but the overall weight meant it was getting banged up pretty good on its journey to my house. Each slide pair is packaged in its own plastic sleeve so they don't get all jumbled together.The slides themselves slide smoothly and have a little bit of play should your cabinet construction not be dead-straight on (I know from first-hand experience). They install quickly and come apart easily so you can mount the pieces separately. I will be buying more in the future!

I have been making cabinets and woodworking for over 40 years. These are awesome ball bearing drawer slides. Well over a year of heavy use and operate flawlessly. Very happy camper. The are such an upgrade to the cheap slides that come on cabinets, allowing full access to the drawer, smooth operation and great weight capacity. There are not many products I give a 5 star rating and don't have something to complain about, this is one of the few. Just buy them, you will be glad that you did, what an upgrade. The only thing they don't have is an auto close feature, but I didn't want that anyways, I want the drawer to stay open even at halfway, until I decide to close it.

When making drawers for cabinets, I always use drawer slides. Further, I always allow for excess weight in the drawer. These slides are full extension and can support 100lbs. Pricing on these slides is very attractive when compared to some of the name brands. When building a cabinet that needs 10 pairs of slides, using slides that cost $15-20 drives the price way up.I had no trouble installing the slides. Keep in mind that the drawer must be EXACTLY one inch less than the drawer opening. There isn't much wiggle room on that. This is true of all slides of this type.I have purchased these slides in varying lengths for the last dozen projects. Users have been happy with their performance. If the client wants soft close, be sure that you find that feature. This particular slide is not soft close.

Product is good, works great, priced a little high considering they don't supply mounting screws.

Well made, installation is easy, 9 screw hole each side different sizes.Product price is amazingFast shipping .*****

High Quality quality. This product is awesomely built. Highly recommended.

Shipped on time and good value for money.

Super happy with these Drawer slides. They are high quality and $10 cheaper then the ones from HomeDepot. They don't come with hardware but you can buy that separately. Product shipped fast and arrived on time.