DB343C 3 in. Continuous Rim Diamond Blade with 3/8 in. Arbor for Extra Clean Cut Wet Cutting Applications in Ceramic Tile, Glass Tile

Worked very well through entire bathroom renovation. Hundreds of cuts. Blade close to shot at the end of the project, but still tackling porcelain tile without chipping. Held up as well as some really expensive blades with similar product profiles. Recommend

cut thru glazed ceramic tile like butter. Highly recommend. I did spray water on the cut as recommended

Got this for a friend that has a YouTube channel and she absolutely loves it. She's been using it for a while now and it's holding up better than expected.

Corta bastante bien, pero deberían mejorar la calidad

Worked great. Used to cut 3/4” slate flooring.

Thsis blade makes minor cuts in glass tile very conveniently. It can be used dry and saves a lot of time for small trim cuts so I don’t have to go out to the wet saw all the time. It chips a little bit but not bad considering that it’s cutting dry. Use this with tool suitable to spin it and a vacuum cleaner saves a lot of time

This blade cuts very well. However, make sure you do not try and cut porcelain tiles. The blade is not meant for porcelain and will stop cutting after about ten linear feet of cuts. I made the mistake of cutting porcelain tiles, and thought my blade was ruined. However, after cutting a few ceramic tiles, the blade seems to be improving. In both cases, the cut is superb! It is the smoothest cut I've ever seen from a tile saw.

Read the reviews before buying, yet., bought this product anyway. The reviews I read were critical in that this blade chips the tile. It does! No matter what I did, it would chip the face of porcelain tile. I was able to manage and finish the project, but in all seriousness. The cheap factory saw blade that came with my$99 tile saw outperformed this one by Miles. Buyer. Beware.

excelente para marmol

No se cuanto dure pero la calidad de corte es excepcional, por el espesor del disco corta el ceramico como mantequilla y no despostilla

Si quieres cortar materiales delicados de mampostería (loseta, azulejo, porcelana) con un esmeril necesitas este disco. Su orilla es "continua", por lo que es mas lento que los segmentados o "turbo" (punto medio entre ambos), pero eso mismo ayuda a que "despostilles" menos el material que estas cortando. Apto para corte en seco o mojado. Mejor precio que en cualquier otra parte, ademas que solo aquí pude conseguir en tamaño de 5 pulgadas, un poco mas de profundidad de corte que el clásico 4 1/2... Si vas a cortar en seco y no quieres polvo usa el accesorio Bosch GA50DC; eso si, tu esmeril tiene que ser tambien bosch y ser compatible, saludos...

El tipo de corte que se consiguió al utilizarlo es excelente!

Cut glass tile beautifully.