ARCCAPTAIN Plasma Cutter, [Large LED Display] 50Amps Cutter Machine with 110/220V Dual Voltage DC Inverter IGBT 1/2 Inch Clean Cut Post Flow and 2T/4T, for Beginners DIY

This is a wonderful beginner plasma cutter. I was skeptical until doing some research and finding out that some are contact start the surface you are cutting has to be bare metal. This one can cut painted and rusted metal which is exactly what I needed. It’s easy to set up and worked perfectly first try. I would recommend this product to anyone looking for a great beginner plasma cutter at a great price!

Im not a pro, just a hobbiest, so I dont use it day in and day out. That said, I've had a few of the budget plama cutters and in each case, I went to use it and it didn't work which sucks on the weekend when I need to get something done. The Cut 50 hasn't done that to me and works each time I hook it up. Do yourself a favor and get the adapter to use 220. I wouldn't waste your time trying to use 110. Excellent machine. Setting it up with my grinder, benchtop belt sander, and other tools under my truck when Im working is awesome and saves my back from having to get up and out to get other tools 30+ times a day.

So far so good, setup was very easy and this baby cuts fine.

Good value for home shop

WOW would be an understatement! Grabbed this little plasma cutter, because I got tired of the angle grinder. Should have bought this one a LONG time ago. Cut through an 8-inch .128 bar stock like absolute butter using 240v at 30 amps, and without the mess! Definitely for the garage mechanic or automotive work. Absolute must have for metal work! Pairs very nicely with my Hobart Mig welder. Incredibly happy!

This cuts steel like butter it has a drag tip torch. I have found with thicker metal, lifting the Torch off of the metal slightly after Striking arc create a much better cut and will save your tips from burning up.

Very nice used it for gouging out welds and cleaning rust off steal to be welded no real problems even tested it cutting 3/8 aluminum no problem. there is 1 downsides to this cutter tho 1 the electrodes are very small and dont have fins on them for thoes who dont know this means your going to go through electrodes fast if your doing a good bit of cutting because they will over heat very quickly 2nd is you cant buy the consumables locally they have to be ordered because your local stores that do sell plasma cutter stuff only sell the better electro types that are 3x to 4x bigger then the ones for this cutter even at harbor freight with their other off brand cutters they are 3x bigger and wont fit this but if your just needed something for light work or just wanting to get into plasma cutters this thing is amazing oh and on a side note this is a inverter cutter meaning do not run it on a normal generator if your trying to do mobile jobs only run it on generators with a thd lower then 6% and there really isn't meany that are cuz if you try to run it on a normal generators no matter if it can power the cutter theres a very high chance the generators high thd will burn out your plasma cutter borads this goes for any type of inverter welding equipment as well

Do not buy this unit. The customer support for this product is by far the worst I have ever received. I purchased this unit in Jan of 2024 and used it for some light sheet metal cutting 3x using a standard 120v outlet. The first 3x it worked perfect. The 4th time all I could get it to do was spark. I did multiple things to trouble shoot it, including checking the outlet volts , putting a new tip on, etc. I even consulted my son who has a certification in welding. After no success I reached out by email, to the company for product support. I was advised to check the tip, which I had already done, but did it again. Then to check my air pressure and adjust, no change. They then they advised me to adjust my settings. Again I did and sent a email I was compliant. Then they requested I video the machine just sparking as I adjusted the settings and send it to them. Again I did it, remember I had only used it like 3x for light sheet metal, there was no good reason it just quit. Then I was advised to check my outlet voltage and again send a video. After going back and forth for an extensive period of time, never receiving a call and being treated like I never picked up a welder or plasma cutter, I finally sent them an email about supporting their product better and either fixing or exchanging the unit and never heard back. I finally gave up. Let the non working unit sit broken in the garage for a year and a half and pitched it in the garbage.

Es una tomadura de pelo.

Fa bene il suo

perfect item and fast delivey

Au premier essai il est super je recommande

Aunque corta grueso, el acabado no es el mejor. Aunque por el precio no está mal.