2 x for Xbox One Controller 3D Analog Joystick Axis Sensor Module Rocker Replacement

If you know what your doing this fixed the issue

Works really well once installed. Removed old joystick and soldered this new component in place. Works like nothing ever happened.

It feels like the dead zone is slightly larger than the original potentiometer. But overall, I hope it's just a matter of getting used to it.

My son's Xbox one controller had a drifting issue, and this purchase fixed that. Using YouTube we took the cover off the controller, tried cleaning the analog stick with rubbing alcohol and canned air, but the drifting problem persisted. Next up was to try and replace the sensor, but I could not find them for sale. I did find this two pack of the whole analog module, and each module has two sensors. We replaced the sensor to the right of the analog stick that controls up and down, and voila, my son is playing 2K without issue.In all, we are able to fix this without any soldering. To summarize, we took off the top cover by removing 5 Torx 8 screws. We popped off the analog cover, then used tweezers and a tiny screwdriver to pry back the green cover for the sensors. We cautiously clicked the new senor into place and the new cover, and the controller is fixed for less than $6 rather than buying a new one for $60.

The thumbsticks positioning is low quality and is inaccurate, avoid these and look to OEM solutions

I swapped one of the potentiometer internals onto my Xbox series x remote and that fixed my stick drift! I don't know how to solder so I'm glad that was all I needed. Wish it was delivered in a box instead, but it wasn't damaged regardless.

Attached is how they were delivered. No box, just 2 electronic items jamming against eachother until they came to my house. I'll try to use the undamaged one to fix my Xbox controller drift issue and update if at least one worked.

Efficiency

functions and looks like original. stick button works in all positions. stick is a bit stiffer but should loosen with play time. good product. be warned you must know how to solder these parts.

Die werden als Ersatz angeboten, sind aber im Gegensatz zum Original mit Plastikstick (da drauf sollte dann der eigentliche "Joystick" geschoben werden) anstatt Metall und der ist dann auch viel dicker. Den "Joystick" kann man da nicht draufschieben. Schlechte Beschreibung sonst hätt ich das nicht gekauft.

Work well

Arrived quickly, these are small parts and they only out them on a small plastic bag. You need to make sure all the posts are straight and not bent before install. I did a straight swap with my old analog stick and it worked perfect. I did not test the second stick I recieved but even if it doesn't work this is still cheaper than buying a new controller

The reason I replaced the module is because the stick on my remote stopped clicking in to do the R3 press. The new sticks work after install but they only click when the stick is centred. Using this button as a run action in most games this is horribly annoying because usually you start running with the stick pushed forward. Buyer beware. Not the same as original.