iPad Cooler,Magnetic Tablet Cooler for ipad/Surface pro/Samsung Tab,Compatible for Steam Deck,Universal Radiator with Temperature Display for Mobile Gaming,Tiktok Live Streaming

The tl;dr - this thing works *brilliantly*. Long version: I have a Surface Pro 9 which I use as an art tablet, and from which I'll sometimes stream my artwork. Running Clip Studio Paint and XSplit at the same time, while driving an external monitor and recording the stream to an external drive is kind of a lot of work for the SP9. The CPU is up to it, but there's no cooling inside a Surface Pro. The back of the device gets hot enough to deliver 1st-degree burns. Seriously. Sometimes the FRONT of the device would get hot enough that it would be uncomfortable to rest my hand on while I was drawing. But the real problem is that when it gets hot it starts dropping frames. I suppose that's better than it overheating and dying, but for the stream the end result is the same: no stream. I used to aim an external fan at the back of the Surface Pro, and this did an okay good job, but it was noisy and inconvenient. Enter the ACEDAYS cooler. I stuck the metal ring to the back of the Surface Pro, a bit to the left of center, where the device got the hottest. This off-center attachment let me keep the tablet mounted in a clamp, while still making room for the fan. The fan, by the way, is so quiet sometimes I forget to turn it on. I'm running an in-line rocker-switch to turn it on and off, which is more convenient for me than reaching around behind the tablet to flip the switch. It works brilliantly. No dropped frames, and the Surface Pro never gets hot. The LEDs flashing around the ring of the cooler would probably be annoying, but I can't see them from the front of the device, so that's not a "me" problem, it's a problem for people on the other side of the room. RECOMMENDATION: If you use a Surface Pro in any sort of an intense capacity, if it's getting hot to the touch, YOU NEED THIS FAN. It'll extend the life of your device, and it'll make your apps run more smoothly because the CPU thermostat won't have to throttle things back when it gets hot.

This cooler really cranks out the cold. It's impressive vs other coolers. This one is larger so won't fit on some devices as it's designed for tablets. I'm using this on my rog ally but I have a aftermarket back cover on my ally that has a heat plate and thermal pad to the apu so this thing makes a big difference in temps as it's cooling the heat plate and helping dissipate the heat quickly. The factory cover on the ally won't be as effective as it would just be cooling the back cover as there isn't any contact. It does cover a few of the vent holes but this keeps my temps in the 70s at 30 watt turbo and mid 80s if I have cpu boost on with lower fan rpms vs maxing out at 95c and throttling and fans ramping up to max with factory cover and no cooler. Make sure to place the clear film correctly as it helps prevent condensation getting inside which you don't want inside device after long playing sessions. Make sure to use an adapter that can do 9v not just 5v if you want to get the full potential out of this. If you have a steam deck, this one will be a little too big and cover the vents on the back so stick with the smaller one for steam deck. You'll also want the jsaux cooling backplate so you have direct contact with the thermal plate and pads or you'll just be cooling the back plastic mostly. This is by far the strongest magnetic cooling fan I have tried.

I bought this to cool my surface tablet while it's docked. The fan is quiet and pushes plenty of air. I've had it on non-stop since I bought it and it's worked flawlessly. Seems to be pretty durable from my use. I wish you could turn off the colored light but not big deal as it's out of sight.

I'm blown away at how well this works. I was able to increase my graphic settings significantly by adding this fan. I cut the back out of my protective case to make room for the fan. The only reason I'm giving this 4 stars instead of 5 is that my adhesive thermal Plate keeps coming unstuck... I cleaned the back of my ally before application, followed the instructions to the T.. not sure why it has trouble staying stuck on.. I don't know if it's a product issue or a ME issue. Either way this is an amazing fan especially at this price point. I ended up buying a 100w power supply to support my Ally and plug in this fan. Since the fan takes around 25w you'll need an additional power supply for it. Best thing to do is swap your original supply for a multiport 100w supply to have ample available power for your device and Fan. To help with cable management I secured the power cables to the fan and used cable ties to hold the two cables together. This helps prevent tangling and knotting. I highly recommend this fan

Works amazingly!

Work very well with my ipad while gaming

Esse realmente funciona, é um cooler relativamente grande, de fato maior do que os de celulares...abaixando bem a temperatura do tablet... Valendo muito a pena o custo e o benefício que entrega.

انا العب ببجي ومره حلو بس عيبه ان السلك قصير

Empfehlenswert, kühlt gut hält auch gut

Rien à voir avec le modèle de l’annonce. Il est plus petit 6cm et pas 10cm. C’est un refroidisseur de telephone pas pour tablette