Furologee Kitchen Bakers Rack with Power Outlet, Microwave Oven Stand with Storage 4 Tiers, Coffee Bar Table with 6 S Hooks, Kitchen Storage Shelf Rack for Spices, Pots, Rustic BrownThe Forest Stewardship Council

I was pleasantly surprised with the quality of this rack. It comes with metal arms that cross on the sides to add stability and even before I added those I was surprised with how little it swayed. After adding the metal X’s on the sides it doesn’t budge. The top piece is shorter than I expected but that’s my fault for not measuring the height of my space. Since the top is attached with only two beams, that does wobble a bit. As long as you’re not shaking the thing around that shouldn’t be an issue. The outlets are very handy to have, since I use it as a coffee bar. Especially considering the low cost, it’s a great purchase overall.

The kit arrived with no damage. I chose this one because of the measurements. It is exactly what I needed to put against an end cabinet, sideways. I wanted it lower than the counter for using appliances like a pressure cooker, yogurt maker, or crock pot or bread machine I can look into without a step stool. The vertical rack parts are separate pieces that can be saved for use later.ASSEMBLY: I took inventory of everything first, and set them out with their letter/number labels. There was an extra one or two of almost all small parts and screws. Follow the directions and diagrams carefully. They are correct. Take your time, and you will save time. Look ahead at the next step to see if what you did is right. If you assemble a bar in the wrong direction, the holes for the next step will be on the wrong side, or won't line up. If that happens, back up and take another look at the pictures. Don't tighten anything until the end. If the screw holes don't line up, or the legs are different lengths, you likely have connected the wrong ones. There is a photo on a review here of someone who did just that and blamed the cat -- I mean product. The same goes for the screws. Someone complained the screw wasn't long enough. They likely used the longer one where they should have used the short one. The drawings show which ones to use. We had to undo a step once; the schematic was correct, it was our mistake. Take note that the top surface overhangs a little in the front, not the back. Also the cross braces go on the outsides, so those holes need to be oriented to the outside. If stickers bother you, remove those before tightening all the screws. (Don't ask me how I know.)THE RESULT: Perfect, and sturdy. I was quite pleasantly surprised to find that a West Bend 41055 Breakmaker just fits on the wood shelf, and I mean JUST fits under the top surface. The wood shelves are sturdy. Not so much the light duty mesh shelf. We want to use it for water, so Handy Hubby will cut and stain some wood for it. He's good like that. The electrical panel can go on either side. The cord is heavy duty and long enough to reach a reasonably placed outlet. It takes up one outlet, but provides two, so there's a win there, and a more convenient outlet for other things in the kitchen.For the cost, it's a winner.

I fix it to away it will work. The top squares are uneven cut which causes the rack on the back not set up well. The rack on the back needs 2 screws on each side which you can only put 1 on each side other than that it's perfect.

I was looking for a shelf that i could keep my ice maker and drink making supplies, but only had a small spot in my pantry to fit it! This was the perfect fit! It holds my ice maker no problem, and all of my drink supplies fit as well, even with room with the pumps on the bottles! So excited for my morning drinks now!

Lots of parts, but Easy set up - took me 30 minutes to set up by myselfTakes up little space but stores a lot of stuffSnug fit into the small space of less than 2 feet I expected it to fit inAesthetically pleasing (looks great)Able to withstand a lot of weight (sturdy for this price)

It was nice, not too hard to put it together and very sturdy. Just pay attention to the pictures because it describes where the holes should be. I definitely had to take some things apart because the holes had to be facing a certain way.💯💯

What you pay for is what you get. This doesn't cost much. Dimensions are what one would call extremely optimistic, and whoever measured them probably measured that Billionaires submarine. Directions are straight up backwards for the wood panels, and there are gaps, alongside the fact thay the wooden pegs to hold them together dont actually fit. They're far too small, I suspect a common issue in the factory. Would I buy this again? No. Am I energetic enough to take it apart and return it? To my demise, another no. It's servicable.

All the measurements/dimensions were accurate and it fits my space perfectly! Seems a tad cheap, but for the price it’s good. Pretty sturdy. Helped me get my clutter off the floor and make use of the small space i have.