Smooth/Textured PEI Panda Build Plate for Bambu-Lab P2S P1S X1C X1E P1P A1 3D Printers, BIQU Double-Sided PEI Spring Steel Sheet for Bambulab 3D Printers, 257x257mm, 1 Piece

Bought this for BambuLab X1C and will probably only buy this brand from now on. Cheaper, ready to use straight from package, and have had zero adhesion issues. This is a good quality bed and does exactly what it aims to do.

Best Plate, never fails!

Leaves a cool finish, but adhesion is a bit tricky on the "carbon fiber" side and the pattern isn't as pronounced as some of the others. The textured side works great just like all Biqu plates I've used.

Really nice backup plate. Can't yellow the difference between this and OEM except the cost.Wash with Dawn and warm water.

Caution: the “smooth pei” option is actually a pei sticker sheet, just like the Bambu plate. I’ve been looking everywhere for a smooth pei sheet that’s a pei bonded bed similar to the ubiquitous textured plates except smooth. I print high temp materials and need a smooth plate that won’t start peeling up the sticker sheet after several builds. I thought I had struck “smooth gold” here based on the photos and description but it’s just more of the same.Tip for those having adhesion issues on x1C with any plate that doesn’t have a barcode: #1 make sure the plate is super-clean, then #2 get some whambam barcode stickers for a few dollars they solved all my issues.

I was surprised how well this works. I replaced the PEI plate in my P1S to see if this would help with smaller prints not come loose while printing. I set the plate temp to 35c and even small prints that would not stay on the PEI plate stuck really well to the cryogrip plate. I have not yet had one print come off during printing yet, even for the small pieces that I have printed. The only minor complaint is even though the plate looks textured, the bottom of the print is a lot more smooth and looks ok, but not the cleanest looking. Overall, I am happy with it.

Pla sticks to this thing no matter what! Very impressed thus far!

(UPDATE)After using this plate for roughly 20 prints it was time for a cleaning and I did the standard dishsoap/ hot water, made sure all the residue from printing was removed and now literally nothing sticks to it… I’ve had multiple different style plates and know what I’m doing and this plate went from being the best sticking plate to the worst in about a few weeks of use.. makes 0 sense but adhesion is terrible nowLoving it on my a1 mini, was in need of a textured replacement and this is perfect the adhesion is extreme!