GTPLAYER Gaming Chair, Computer Office Chair with Pocket Spring Cushion, Linkage Armrests and Footrest, High Back Ergonomic Computer Chair with Lumbar Support Task Chair with Footrest

I’ve been waiting to make a review until after a few months of use. I got this chair in January, and I’ve been using it for my setup ever since. The chair is easy to assemble and the instructions are clear. Once assembled, the chair is sturdy and well cushioned. If you aren’t a fan of firm cushions, and require more plush cushioning then this wouldn’t be the chair for you. For me personally, I prefer firmer cushions so this is perfect for my needs. I sit in this chair for hours at a time during my gaming sessions, and have fallen asleep many times in my chair because it is that comfortable. The leg rest is surprisingly sturdy as well. I don’t really use the lumbar support but it’s not built in so it’s as simple as just setting it aside. I am a plus size woman, weighing ~275lbs. So if it holds me up easily, and remains sturdy, then that is amazing. I have a larger butt, so I was initially nervous about getting this chair because I was concerned about fitting my rear end in it for long periods of time, but it fits like a glove. It’s not too tight and not too loose. I think it would work well for people smaller and less wide than I am. My hips measure 54in for reference. Overall, my primary concerns flew out the window once I sat in the chair, and it adds the perfect finishing touch to my setup.

It could use a bit more padding on the back but overall a great chair feels very sturdy, the material is very nice especially the stitching which has to be my favorite part, it is color accurate to the pictures and even better in person, the reclining is really nice and smooth, I would definitely recommend this for someone who doesn’t use it all day everyday and if that is something you are doing I would look for a chair with more padding but for me it’s perfect. Also it was easy to set up and the instructions were clear.

The hardest part about putting this thing together is the legs. It says "slap on floor" or something to get the screw holes to line up. THEY WON'T! What you really need to do is get it as close as possible to lining up, then put the bolt in at an angle but DO NOT SCREW IT IN! Put the tool into the bolt and then use the two to press inwards and kinda pry back the leg piece until the bolt stands upright like it should. THEN screw it in! A screwdriver won't work because it tends to slide right back out if you aren't holding it in place when you start to screw in the bolt. So when you remove the screwdriver to put the bolt in, you'll lose the alignment anyway. And you need the tool (included with it) in the bolt to be able to apply enough pressure while at an angle to "catch" the screw hole before pulling it into line.HEAD. ACHE.Aside from that, here's my assessment of the chair's use compared to about 4 or 5 others that I've used in my lifetime:The assembly is easy and straightforward after you get those leg screw holes lined up. The arms seem to be shorter in length and height than some other chairs I've had. But that's a good thing for me because when the seat is at the correct height, the arms of other chairs were rubbing against the underside of my *GLASS* top desk. Occasionally that little bit of give in the chair when I get up or descent when I sit down would snap the arms against the glass of my desk, and it always sounded like I would break it. Thankfully, I didn't.Also, I love the fabric covering! I ordered this specifically for that one reason. The one I'm about to throw out now has the typical vinyl covering and as it aged, it cracked, especially on the arm rests, and my arms were getting torn up by it! While this cloth will also wear over time (especially being microfiber), it shouldn't create sharp vinyl pieces to scratch up my arms, so that's a plus!The back of the chair has a really thick dense foam that isn't quite conforming to my spine just yet. It's going to take some wearing in to really feel comfy. My worry is that once it breaks down enough to wear in, the foam may deteriorate very quickly afterwards. That's something to watch for in the future though. The arms may have a lighter foam, or maybe the foam just conforms better to sharper points, like elbows. But they seem to have more give to them, for which ever reason. The back also doesn't lean back as far as some gaming chairs I have had. That could be bad for me as I sometimes get *very random* vertigo and need to lie flat for a few minutes until it goes away. With this chair, I'll probably have to stumble to a couch or bed to lie down if it happens.The seat itself is not too long or short either. I've had some that were short enough I felt like I would fall off the front of the chair. And others that were so long that when I saw back, my knees were ON the seat of the chair. This one is, thankfully, right in between. The foot rest isn't anything special nor bad, but it "attaches" in the slides with a bolt on the back of one side. That will make it easy to remove when it's time to buy another chair. With the exception of the gas lift, most of this will be easy to take apart to fit inside of a large trash collection container when it's time for that. (Yes, I've gone through enough chairs for that to be a concern now!)I never use the lumbar supports, so I can't give any information on that.

I upgraded my old gaming chair to this one, & I love it! The green is such a cute color, the cushion feels great, the footrest is perfect for either stretching out or sitting criss cross, & it was really easy to put together. I put it together on my own in under an hour. It comes with all the tools, & easy instructions. It’s comfortable to sit in, comfortable to recline in, very sturdy, & the material is pretty soft! It was a little smaller than my previous chair, but still a perfect fit. Definitely worth the price!

Very comfortable chair for the price. We didn’t install the foot rest- as tall people, they didn’t seem like it would work for our long legs. The reclining option is very nice and the quality is good as well. The height of the back of the chair is perfect and the height from the floor is adjustable: we have the chair on carpet and it rolls very well. It comes with a lumbar support pillow and a head pillow too.

The chair I received seems like a cheap knock-off of what I thought I was purchasing. The back is thin, stiff, and uncomfortable. The bottom cushion is much thinner than what is pictured and is stiff and uncomfortable. The lumbar pillow is much smaller than what was pictured. I installed the guides on the bottom for the foot rest, but the holes are too small for the foot rest's metal rods to fit.I bought this chair because I was looking for a comfort upgrade, but this is anything but that. I would like to say, "this chair is good for the price point," but I would be lying.Do not buy this chair.

Its everything it advertises. Great installation. Great product.

Got this chair for my husband. It's absolutely great and was easy to put together. I put it together with my helpful 5 year old in less then an hour. It feels very supportive and good quality so hopefully it will last well.