ASUSTUF Gaming B850M-PLUS WiFi AMD AM5 B850 mATX Motherboard, 14+2+1 80A DrMOS Stages, DDR5, PCIe 5.0, 3X M.2, Wi-Fi 6E, 2.5Gb LAN, DP, HDMI™, USB 10Gbps & 20Gbps Type-C®, BIOS Flashback™, Aura Sync

I'm not a gamer. I use my personal computer for various hobbies, such as routing circuit boards, rendering video, the occasional AI project, running Linux VMs, etc. I had no trouble at all with this motherboard. I purchased 64GB of DDR5 RAM at the same time, as well as a new 9900X CPU, a Noctua cooler, and a Samsung 990 SSD. All of this worked well and booted properly on the first time. I burned in the system using Ubuntu 24.04 live distribution on a USB stick, ran some performance tests, and used Ubuntu to copy over my existing Windows 10 image onto the new Samsung SSD. Unlike the other reviewer, I had no problem using the Wifi under Ubuntu. I don't use Wifi on Windows, so I wouldn't know whether it works there or not. As a productivity user, I don't really care about some of the "Gamer" features of this motherboards, nor do I care about aesthetics like glowing LED lights. I picked the Tuf series over the ASUS B840 because it seemed like a beefier build overall. The only drawback is the relatively large heatsink at the rear of the motherboard -- it precludes me from the possibility of installing a second fan on my Noctua cooler. I'm skeptical whether such a large heatsink generates any real benefit, other whether it is done for appearance sake. Nevertheless, I don't really need that second fan anyway. Installing the SSDs was a little bit unorthodox with a plastic springy clip that ASUS uses rather than a screw, but it worked fine. There's a hefty heat sink that fits over the SSDs and will further hold them snugly in place. One complication I had during boot was that I had the enable Compatibility Support Mode (CSM) to get it to boot from the Samsung 990 SSD. Not sure if that's typical or if it was because of the idiosyncrasy of the existing SSD image that I brought over from my old computer (it was a new Samsung 990 SSD, but an existing image that I wrote to it). All things considered, a good motherboard that feels like it's more than tuf enough for my needs.

Excellent board right out of the box worked great 9600X and 6000 mem. Remember kids, memory training on the first start is a thing, let it happen. Then do EXPO settings, then install the OS.Installing the board may require removing the rear case fan to get it in place.Board has great heatsinks, plenty of fan headers and RGB headers but has no RGB onboard.Well built, well packaged, everything the client wanted.

I purchased this board to replace an ASUS ROGX-470F motherboard that died.Pros:This board has the same number of SATA ports as the 470 (6), which was important for me, because all my games are stored in SATA SSDs.This MB boots quite a bit faster than my previous board. That’s always a plus.Built-in Wi-Fi controller. While I had a Wi-Fi expansion card for the x470 board, it was good to have it built-in to help clean up the interior of the case.Plenty of ports. Not only the above mentioned SARA ports, but plenty of USB ports, as well, including support for front-of-case ports. I have 6 USB cables plugged in and still have two free ports in the back, and 6 more on the case top.Drivers included on CD/DVD. This is a big deal to me, because newer boards don’t appear to include them. PNP picks up much of the drivers, but not all. Without included drivers, you might have to go to another machine to download them. That’s not customer-friendly.Cons:The Wi-Fi antenna is non-magnetic. This allows the antenna to slide off the case way too easily, diminishing the signal from the router, if you don’t notice it immediately.The Aura lights are not on top of the board. If you have ARGB light bars, it can flood out the boards built-in lights.DisplayPort and HDMI ports included, but so far, I have not been able to find integrated video hardware. This one has me confused.

Motherboard is great. My 9800X3D works on it right out of the box, no BIOS upgrade needed. I wish they included more M.2 rubber pads for single sided SSD’s. They include 2 but there’s three slots, so you’ll need 3 if you plan on filling all 3 slots with single-sided NVMe’s. The PCIe slot leaves a lot of be desired. The releasing mechanism is so flimsy that it’s never once worked well. You push down the latch and it doesn’t help to eject the graphics card. It flips up but slides past the graphics card, pinning it in the open position. Cheap design. Other than that, I have no complaints. Plenty of USB ports and support for lots of RGB and fans. One last thing I want to mention is the board came with two slightly bent pins for something on the bottom left of the board. I don’t have the manual in front of me nor did I use it, but it arrived bent, like it was manufactured like that, but not supposed to be that way. Doesn’t really affect my use case but I wanted to mention everything.

Honestly Im super impressed with this motherboard. I'm a huge fan of Asus and their products, specifically their TUF gaming line. I've had 0 issues with this mb and paring it with a R5 7600x and a RX 6600, with 32 gb of ram is glorious work, with my new setup I'm able to stream.Very easy to use Bios, Asus made it very user friendly. Amazing features like the GPU Q-Latch and the M.2 Latch. Wifi connectivity is fantastic, i haven't had speeds like this for a long time.It does fit in with my gaming set up, which is an all black set up with hardly any rgb.Overall Would 100/10 Recommend