🌟 Light up your drive, dominate the fog!
Marsauto H10 Fog Light Bulbs deliver a powerful 10000 lumens of 6000K white light with 360-degree illumination, ensuring superior visibility in foggy and low-light conditions. Featuring an intelligent IC driver for flicker-free operation and a universal 1:1 plug-and-play design, these bulbs offer hassle-free installation and a long lifespan exceeding 50,000 hours, making them a reliable upgrade for safer nighttime driving.
Brand | Marsauto |
Item Package Quantity | 1 |
Manufacturer | Marsauto |
Automotive Fit Type | Universal Fit |
OEM Part Number | / |
Global Trade Identification Number | 06976865325326 |
Model | G2S Fog Lights |
Item Weight | 1.76 ounces |
Product Dimensions | 1.57 x 0.98 x 2.76 inches |
Country of Origin | China |
Item model number | H10 |
Exterior | Painted |
Manufacturer Part Number | 6351LFG2096US |
M**N
Easy to Install & Bright
These Marsauto H11 fog lights are pretty darn bright! They’re as easy to install as any other H11 bulb - do a web search for your car model and see what others have to do. Sometimes access is easy: crawl underneath, unclip the harness connector, twist the old bulb out, twist the new one in, reinsert the connector, and you’re done! In the case of my Fiesta ST, I had to remove the front driver wheel liner to access the fog light, but the passenger side was immediately accessible. Since I always run my fog lights, hopefully these have a very long lifespan. I'll update if these don't last very long, overheat, or have other problems.First note: As per the instructions, do not touch any part of the bulb that’s not the external connector as finger oils left on the very hot elements may/will cause damage to them, including premature failure! Second note: In the picture, the lights look rather yellowish: That's because I have a film applied to the lens to make the fogs look yellow for aesthetic purposes. These are overpowering the yellowness of the film to the point where I might just remove the film and let the true brightness shine through.
H**N
I really needed it
I drive a commercial vehicle and most of the time I drive in the early morning or late evening. Also, my eye sight is not that great neither. Very often I had a hard time to see the roads clearly, especially the road signs. This could be very dangerous for me and other drivers potentially. So I decided to change the light bulb by myself.Even though I only change the light bulb once a long time ago, however, I still remember most of it, I was able to figure it out quickly without any issues. The hard part is to open the cover of the light. The light bulb just plug and play. I am very happy with the new light bulbs because I can see the road more clear and road markings become clearer. I can confirm the improvement is really significant and I have no more worries, especially during foggy conditions.Overall, the product is exactly as described on the website and I have noticed a huge improvement compared to my original light bulbs. I can also confirm these light bulbs made from high quality materials and is well designed. And I really needed it.
L**R
Bright Upgrade for Early‑Morning Commutes
I swapped out the stock fog bulbs on my 2018 sedan with this H11 set because my route to work runs through a foggy valley before sunrise. Installation was as easy as promised, unplug the old bulb, click in the new one, and tuck the wiring back. No bumper removal, no dashboard warnings, and the whole job took maybe 5 minutes per side.The difference on the road is noticeable right away. The light is clean and white, cutting through mist without that yellow tint factory halogens give off. Road markings and the edges of narrow country lanes show up clearer, and oncoming drivers haven’t flashed me, so the beam seems well focused.I also like the compact build. There’s not much space behind my fog housings, but these fit without any fuss. There’s no flicker or condensation in the housings, and the aluminum bodies stay cool to the touch after a drive.
T**E
Huge improvement in brightness and light quality!
Pretty easy installation on our 2016 Sienna. Had to jack up a little bit for each side, just to make it easier to actually see the bulb wiring placement instead of doing by feel. You do need to remove a few screws from the underbody trim below each fog light; quick and easy to do with a 10mm socket (could also use Phillips screwdriver, instead, if preferred).HUGE difference in brightness and light quality! One photo shows you the “old vs new” bulbs when on (new one obviously the bright white on left), others show you a bit of the trim removal and a look up at the bulb socket region (pending insertion of new bulb).
J**T
Probably great for an ATV
I used these headlights as replacement lights for my 2011 Toyota sienna. Technically, LED headlights may not be legal for your car. Check your local laws and restrictions. These lights were super easy to install in my Sienna. I didn't need the great instructions that were provided. As you can see by the picture, the lights were packaged very well in protective sleeves.The reason I can't give this a five-star rating is that the lights were dim in my vehicle. They may be perfect for an ATV. I don't know the geometry of the light fixtures and how that might impact the brightness these lights cast. All I can tell you is that they were not bright in my car.
M**W
Bright New Fog Lights
I installed these LED fog lights on my truck and was honestly impressed with the difference. They’re way brighter than the old halogens—really cut through fog and heavy rain without blinding oncoming drivers. The beam is clean and focused, and I can actually see road edges and potholes clearly now, even in rough weather.Installation was super simple—took me less than five minutes, and no bumper removal needed. They fit right into the factory sockets without any issues, even in the tight space near the wheel well. No flickering, no warning lights—just solid, bright output.I noticed that the aluminum housing feels sturdy, and they stay cool even after long drives.
L**U
Easier to install fog lights than I thought
These fog lights were a huge upgrade for my car, so much brighter than my old halogens and really make a difference in heavy rain or foggy mornings. Installation was quick and easy, just a simple plug-and-play without needing to mess with the bumper, even with the tight fit in my vehicle. The beam is focused and clear, and I like knowing they’re engineered not to blind other drivers. The durable build and anti-flicker tech give me peace of mind that they’ll last, plus no more annoying dash warnings.
L**D
Bright light but caused check engine light
These lights were easy to install and put out a prodigious amount of bright white light. The beam pattern seemed quite satisfactory and I haven’t gotten any cars flashing their lights due to them thinking I had my bright lights on. These lights were just fine concerning light output, but after using them the next morning I had a check engine light on. The code indicated a low voltage condition and I’m not sure if I will get the check engine again but these lights do draw more energy than the stock halogen lights.
Trustpilot
5 days ago
2 weeks ago