amFilm (3 Pack Tempered Glass Screen Protector for Google Pixel 3 (2018)

Read a lot of poor reviews on screen protectors for the Pixel 3, but I took a chance getting these which had no reviews posted at the time of purchase. I'm glad I did.I wanted a tempered glass screen protector that:1. did not have a black frame,2. fit my phone well (with room for a case),3. was easy to install,4. did not leave bubbles, rainbows, etc,5. did not have touch sensitivity issues (such as non-contact areas), and6. did not have adhesion issues (like peeling up at the corners or edges).I got all that! And because it's a 3-pack, so did my wife, and my buddy down the street!I would caution you to double-check that your screen is free of dust before installing. I have one little spec trapped that I somehow missed. Also, someone else suggested applying it with the screen on and lit to make sure it's centered. That is a really good idea as I did mine with the screen black and it's a hair off center. But that's all on me. I actually think is good medicine for my OCD!At first it seemed like it was attracting a lot of dust, but after about a week of use, that's no longer the case. There's a definite gap around the sides but I think that's helpful for fitting a case that hopeful has a lip over the screen. It's not curved on the edges, but I don't think it needs to be. It looks like it will protect the active display portion of the screen. I would point anyone with a Pixel 3 to this product.Update Jan 2019: After about a month of use, no major issues. I did develop a crack on the upper right side near the power button. It's nearly imperceptible, but on a plain white background, looks like a very thin hair on the screen. I don't now how or when it happened, if it was due to a drop or maybe it's from my constant pushing of the power button, both to sleep the phone or active the camera.Either way, it doesn't affect the feel of the screen and I'm still happy overall, especially for the price. No cracks in my wife's (and no cracked screen more importantly).Update Mar 2019: 4 months of use now and other than that hairline crack that showed up near the power button, it's looking great. And the main thing is that it works and feels great. No peeling or tough issues.I'm thinking I'll order another pack though. My wife scratched her protector up in her purse (not bad), and between the spec of dust, slightly crooked placement, and hairline crack on mine, I'm thinking I can afford $10 to do it right. I use my phone daily (hourly really), so probably worth it, right?

I purchased a few other protectors and this one is the best one I have tried so far. Now I can just enjoy my phone without have to search for any more protectors.Firstly, let me tell you what you can expect from this protector.1. The protector is about 1mm smaller on each sides. This is common for screens with curved edges to avoid the protector from easily being lifting off the phone and to avoid air bubbles from developing from the edge. The width of the protector is about the same size as the width of the visible portion of the screen. So carefully center the protector when you apply it. You can see on the pictures that I was slightly off center at the lower portion.2. The protector is not tampered so it may feel a bit rough on the edges. This is not be a huge deal for me since I have a case on the phone. The lip of the case prevents me from touching the edges. The only part that most people will feel is the upper edge by the top speaker and camera lens. If you scroll down a lot from the notification menu, this may take time to get use to. I adapted and now scroll down from the upper right side of the menu.3. Protector seems to collect more dust on the edges compared to my other phone with a tampered glass protector.This protector does not touch my phone case. It should be compatible with most phone cases.If none of the 3 things above bothers you, you should be happy with the protector. If any of them are a deal breaker, I wish you the best of luck on your search.

This is the 4th screen protector that I have purchased from this company. I have had great luck with them and would highly recommend this brand. This pixel 3 screen protector arrived repackaged, but the quality was still excellent. It fits the exact width of the screen. You definitely need to align it just right for it to adhere perfectly.Edit: this screen protector also works perfectly with the OtterBox symmetry case

This is the 4th brand of screen protectors I've tried for the Pixel 3 and it's the only one that fits correctly! I was so relieved when It actually worked.All the other brands I bought had one or both of two issues. First is that the Pixel 3 screen has rounded edges, which means the screen protector needs to be slightly smaller than the screen on all sides or else it won't stick properly and will began peeling off the sides after a while. The second issue is that some protectors like to be cheap and only have adhesives on the sides, which will cause rainbow effects in the middle of the screen depending on the angle you view it at.This was the only protector I found that didn't have either of these issues. Admittedly though, it took me all three protectors to get it on just perfectly but I'm extremely picky about my screen protectors and I need them to fit absolutely perfect. I'm planning to buy a second pack soon in case I need a backup, but as of right now a couple weeks after applying it the screen protector looks and feels perfect. One thing to mention is there were a few small air bubbles on the screen after applying that wouldn't go away. But all I had to do was apply a bit of pressure to each bubble for a good 20-30 seconds using my shirt wrapped around my thumb and that got rid of most the bubbles. The two bubbles that were left were very tiny and when I woke up the next morning they had faded away. Since then the protector has been perfect with no lifting at all!

This is not tempered glass. It bends like plastic, which I would have been fine with if the installation was easy. However, it was not. I've installed similar screen protectors in my old phone and never had an issue, I could get the bubbles out.

This is my second set of screen protectors for the Pixel 3 and I much prefer them to the previous brand I used.Last time around I had issues with dust and water getting under the protector, but I've not had the same issues this time around. I equally like the fact that this protector is clear all over - my previous set had a black section at the top/bottom which can clip the screen if not correctly placed.I did have a slight issue with air getting trapped when applying it first time. However as I'd cleaned the screen well with the wipes provided I could lift the screen protector at one side and re-apply it without any further issues.The one minor downside is that it can feel odd when swiping down from the top as there's a cutout for the cameras and speaker. However I feel this is an ok compromise for preventing dust entering around these regions.Overall I've not noticed any lack in sensitivity or resistance when swiping around the screen. And I hope these will last much longer than the previous brand I used.

Decent product - durable and doesn't impact touch sensitivity. The protector is adhesive all over, rather than just around the edges, which prevents it from lifting off. There is no dot matrix, and no rainbow effect.However, be prepared to use all three protectors trying to get a correct alignment without bubbles. It's easy to misalign the horizontal position because the application tabs cover the front-bottom speaker, which is your only means of checking that the alignment is correct. If you're half a millimetre out on horizontal alignment then the pixel's curved edges will mean that one long-edge does not fully stick and air bubbles can form from that edge.

I picked up this screen protector just over a year ago now and it has been absolutely fine. I would say that it is ever so slightly smaller than the phone screen, but once you put a case on your phone you don't notice this at all.Since installing the screen protector and a rubber case I have dropped my phone well over a dozen times and it has survived each one. Although I can't say with certainty that it wouldn't without the protection I've put on it, I'd guess that at least a couple of them would have been bad enough to scratch, crack or shatter the screen.Personally, I think it is worth the investment.

I used to use glass screen protectors religiously but these are just slightly the wrong shape for the Pixel3, the edges are very noticeable against the curved sides both when view and holding, so I ditched it and if I drop it I drop it.

I bought this as a replacement for my screen protector which I used for two years, and this one only lasted two days.The protector cracked for no reason, and the edge actually shattered, again for no reason.It comes with a set of few so I replaced that again, but that didn't last long too.I even got my finger cut because of the shattered screen. This is not only useless but actually dangerous and I would rather recommend to use nothing instead of using this piece of glass.I honestly want refund but it's too late so I would leave an honest opinion instead.