WT07 Micro 5.8GHz 25mW FPV Transmitter and 600TVL Camera with OSD Interface for FPV Quadcopter Drone Wireless Radio Transmission

I got this as a replacement for the broken camera on my Mobula7. Very happy! It works much better than the stock one. I used to lose video every time I flew behind pretty much anything. This one barely has any static in the same situations. Its also a perfect fit in the canopy. Very easy install.The only issue was the wiring diagram for the OSD was backwards (at least in my interpretation). What it calls “video out” is the return from the flight control, NOT the line going to it. If that makes sense. I wired it backwards the first time but it was easy to troubleshoot and now it’s working perfectly.

Excellent camera for a tiny whoop. Picture quality and range has been excellent. Camera has taken several direct hits and still going strong. Have bought 4 total so far not a single issue.

Good picture and clarity but after a month the image started fizzling out with throttle - something about power delivery/voltage regulation.I replaced the power cables, connections, soldering points. And yes, its still in immaculate condition, so no weird random solder, nor did it happen suddenly after a crash. a component is dead.Worse, this was my primary camera on my only working whoop :(

Decent little camera for a TinyWhoop, but if you don't particularly need the OSD capability get a WT05 instead for easier plug-and-play installation.I already had a WT05 and got this for my second whoop thinking I might do some experiments on a very simple on-screen display. Unfortunately it's harder to just hook this up and make it work. I'd thought maybe I could pop out the contacts and put the power ones in a two-pin picoblade housing and join the video in and out leads under a common piece of heatshrink, but they're actually 1mm contacts not the 1.25mm picoblade ones commonly used for power. Didn't have any matching connectors onhand so ended up identifying power contacts on the opposite side and soldering fine wires there. Unlike the picture mine came with black epoxy gunk over where the wiring harness is soldered - nice for off the shelf reliability but harder for custom installations.Incidentally current draw was close to 200 mA - which suggests not to power the camera when not flying, as it would drain a 150 mA cell in about 45 minutes just sitting there.Can't really speak to range as I've only flow it in a small indoor space - though it did work with a metal door blocking the direct line of sight between it in and the receiver, probably because there's plenty of other metal around to bounce signal along an alternate route.

This is a great small camera for 1s whoops.The vtx is the weakest link being only 25mw. Can barley fly it around the outside of my house with how much break up there is, vs 200mw I can go all around smoothly.I recommend getting the 200mw unless you are on a strict weight budget.

clear as day video, great quality little camera, smaller than your standard cam, so you can hot glue it in the mount without over-weighing your whoop. durable enough. (busted button however still able to switch channels with esd tweezers). Will order again. (25MW, OSD, Dipole)

Exactly what I needed to add FPV to some small aircraft and it will work on larger planes as well. One thing to know that the manual does not explain is that you must connect the video output and video input wires together if you are not wiring this to a flight controller for OSD injection.

If you are having issues with it displaying video and not running an OSD Setup you need to connect the yellow and green wire together to get video.